Safety Information
Table Of Contents
Page 54 of 60 Report No. WUX202107133461UL
TRF No. IEC62368_1C
Appendix 1
ATTACHMENT TO TEST REPORT IEC 62368-1 2
TH
ED.
U.S.A. NATIONAL DIFFERENCES
AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT – PART 1: SAFETY
REQUIREMENTS
Differences according to..................:
CSA/UL 62368-1:2014
Attachment Form No.
.......................
:
US&CA_ND_IEC623681B
Attachment Originator......................:
UL(US)
Master Attachment............................ :
Date 2015-06
Copyright © 2015 IEC System for Conformity Testing and Certification of Electrical Equipment
(IECEE), Geneva, Switzerland. All rights reserved.
IEC 62368-1 - US and Canadian National Differences
Special National Conditions based on Regulations and Other National Differences
1.1
All equipment is to be designed to allow
installation according to the National Electrical
Code (NEC), ANSI/NFPA 70, the Canadian
Electrical Code (CEC), Part I, CAN/CSA C22.1,
and when applicable, the National Electrical
Safety Code, IEEE C2.
Also, for such equipment marked or otherwise
identified, installation is allowed per the
Standard for the Protection of Information
Technology Equipment, ANSI/NFPA 75.
P
1.4
Additional requirements apply to some forms of
power distribution equipment, including sub-
assemblies.
P
4.1.17
For lengths exceeding 3.05 m, external
interconnecting flexible cord and cable
assemblies are required to be a suitable cable
type (e.g., DP, CL2) specified in the NEC.
N/A
For lengths 3.05 m or less, external
interconnecting flexible cord and cable
assemblies that are not types specified in the
NEC generally are required to have special
construction features and identification
markings.
P
4.8
Lithium coin / button cell batteries have modified
special construction and performance
requirements.
N/A
5.6.3
Protective earthing conductors comply with the
minimum conductor sizes in Table G.5, except
as required by Table G.7ADV.1 for cord
connected equipment, or Annex DVH for
permanently connected equipment
P
5.7.7
Equipment intended to receive
telecommunication ringing signals complies with
a special touch current measurement tests.
N/A