213 675 2021 support@trendytotesinc.
support@trendytotesinc.com support@trendytotesinc.com support@trendytotesinc.
TOOLS REQUESTED 1/4" & 1/8" Drill Bits Tape Measure Mallet level INSTALLATION PACKAGE KIT INCLUDED Safety Goggles Power Drill PRODUCT FUNCTION INSTRUCTIONS Touch key to turn on/off defogging func�on.When defogger is on, the bu�on should be in blue color. The an�-fog func�on can only be used a�er 5 minutes of turning on, and will automa�cally cancel a�er 60 minutes of standby. If extended use is required, it must be re-enabled.
60 inch Installation Step 1 Unpack all the packaging, take out the mirror cabinet, and put it together to measure the total size of the mirror cabinet combination Tape Measure 1 Tape Measu re 2 3 4 5
Step 2 Level and mark the cabinet's location on the wall. Fix Top Mounting Bracket on the Wall Wall Tape Measure Measure the distance between the holes in the Top Mounting Bracket. Step 3 4 1 2 3 Hanging the Cabinet on the top mounting bracket. Make sure top brackets are locked in the grooves.
Step 4 Plug Available Connect the wire to Junction Box inside the wall.
Step 5 Move the cabinet to the right position and screw in the bottom supporting bracket and fix it. Step 6 According to you own needs and preferences, adjust and install the height of the glass shelves, first insert the transparent glass clip, then put the glass shelves on the clip, pay attention to the level of the glass. Step 7 If the cabinet door does not close well or unbalanced, it is necessary to adjust the hinge.
HOME SERVICES Missing Part or Defective?
