Instructions / Assembly

635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax [phone]
http://shop.bluworldusa.com · www.nu-flame.com
SETUP INSTRUCTIONS FOR LA STRADA
Read and Understand the entire Nu-Flame Manual prior to use.
Make certain to inspect the package thoroughly. Carefully remove and unwrap your Nu-Flame fireplace.
Your fireplace will have the following components:
1. Black High Heat Powder Coated Base (with 4 stand-off/thumb screw sets)
2. Stainless Steel Burner
3. Glass Wind Screens/Legs (2 each)
4. Dampener tool
You may wish to purchase a funnel for pouring fuel into the burner
Unscrew and remove the nut from each
standoff/thumb screw set. Leave the thumbscrews
attached to the standoffs.
Thread the screw on each standoff into the holes on
the base (4 on each side). Thread and tighten the
nuts onto each screw from inside the fireplace base.
Unscrew and remove the thumbscrews from the
standoffs.