Owners manual

635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax [phone]
http://shop.bluworldusa.com · www.nu-flame.com
Mark on your wall exactly where you wish to
hang the fireplace using the overall height and
width. Once you are satisfied with the
placement make a mark on the wall 10.25”
down from the very top of where you want the
fireplace to be mounted. This is where the
bottom of the horizontal mounting bracket will
sit.
Using a level draw a line horizontally on the
mark you just made.
Take the horizontal mounting
bracket piece (piece with tabs
at top) and place it on the level
line you drew. Mark the holes
with a pencil and remove the
bracket. Using a ¼” drill bit, drill
the holes you just marked. Take
the white plastic anchor and tap
one into each drilled hole using
a hammer. Make certain the
anchor is flush with the wall.
Place the horizontal bracket on the wall in line
with the anchors and using the anchor screws
secure and tighten the bracket to the wall.
Hang the vertical brackets off each tab on the
horizontal bracket. Using a level, level each side
bracket and mark the holes.
Remove the bracket and drill
the newly marked holes. Tap
into each hole one plastic wall
anchor.