User Manual

635 W. Michigan Street Orlando, FL 32805 · PH 407-426-7674 · Fax [phone]
http://shop.bluworldusa.com · www.nu-flame.com
Rev2 2013
SETUP INSTRUCTIONS FOR ACCENDA
Read and Understand the entire Nu-Flame Manual prior to use.
Make certain to inspect the package thoroughly. Carefully remove and unwrap your Nu-Flame
fireplace.
Your fireplace will have the following components:
1. Glass Cylinder
2. Base
3. Burner Cup
4. Snuffer Tool
Place the base on a flat, stable surface, place the burner cup inside the base making certain it is
well seated in the base and sitting level. Place the cylinder on the base.
To fill the cup with fuel, carefully remove the cylinder. Use only a recommended Ventless Fireplace
Fuel like “Nu-Flame Bio-Ethanol Fuel”. Pour fuel into the burner cup. Cup should be no more than
2/3 full. DO NOT OVERFILL. Wipe up any spilled fuel. Use a long match or extended lighter to
ignite the fuel.
Use the provided snuffer tool to extinguish the flame.
CAUTION: The flame starts out slowly. Please allow 15 minutes to reach the optimum
temperature and flame height. DO NOT ASSUME THE FUEL DID NOT IGNITE. Once lit place the
cylinder onto the base and enjoy. Follow the refilling instructions in this manual.