User Guide

2 SafeCom Go Canon
D60707-18 24
2.8 SafeCom Go Canon – How to
The following subsections contain step-by-step instructions for some of the
administrator’s common tasks.
2.8.1 Get the SafeCom Go Canon software
The SafeCom Go Canon software files were installed from the SafeCom CD or
can be downloaded using the SafeCom Administrator function Check for
updates.
Alternatively a software package can be downloaded:
1. Download the safecom_go_canon_nnn.exe file from the link supplied to
you.
2. Double-click the safecom_go_canon_nnn.exe file.
3. Click Next.
4. Choose the destination folder. Click Next.
Normally the destination folder is:
C:\Program Files\SafeCom\SafeComG4\device_software
5. Click Install.
6. Click Finish.
2.8.2 Specify SafeCom Server
1. Open the Configuration web page (2.7.3).
2. Enter the Server address (hostname or IP address) in Add server and
click Add.
In a multi server solution you can click the Move up and Move down
button to prioritize the order in which the servers are contacted in case
the first one on the list becomes unavailable.
3. Click Apply.
Note: After you click Apply you should allow one minute before the changed
SafeCom Server settings take effect. Otherwise you may get a login error at
the MFP.