User Guide

2 SafeCom Go Canon
D60707-18 25
2.8.3 Register device
1. Open the Register web page (2.7.4).
2. Use the built-in Technician account to register the device. Enter the User
logon (default is TECH) and PIN code (default is 1234).
3. Click Register.
Alternatively the device can be registered when a user with Technician or
Administrator rights has been identified at the MFP. Once the device is
registered it appears in the SafeCom Administrator.
2.8.4 Set password to prevent unauthorized access
1. Open the Password web page (2.7.7).
2. Enter the Old password, New password and Confirm new password. The
password is maximum 8 characters.
3. Click Apply.
Warning: Make sure to store the password in a secure place. If you forget the
password you need to uninstall SafeCom Go Canon.
2.8.5 Select login method
1. Open the Configuration web page (2.7.3).
2. Change Login method to any of the following: Card, Card or ID code,
Card or Windows.
3. Click Apply.
2.8.6 Login with Windows without specifying the domain
If all users belong to the same domain you can avoid prompting users to enter
the domain at the printer.
1. Open the Configuration web page (2.7.3).
2. Specify a Default domain.
3. Change Pre-fill domain to Hide.
4. Click Apply.
2.8.7 Login without PIN code
Use of PIN code is possible on devices with keypad or touch-screen. This setting
applies to the device and overrules the equivalent user property. Requesting
the user to enter a personal 4-digit PIN code when they identify themselves at
the printer can enhance document security.
1. Open the Configuration web page (2.7.3).
2. Clear Login without PIN code if you want to prompt users for PIN code.
3. Click Apply.