User Guide

2 SafeCom Go Sharp - Device server
D60709-22
23
 Device settings
o Administrator name: The user name with which the administrator
can log in to device.
o Administrator password (mandatory): The device password with
which the administrator can log in to device.
o Login method: This determines how users log in. Choose between:
- Auto-sense. Auto-sense maps to Card or Windows if an ID
device is connected to the MFP and on devices it maps to
Card. Otherwise it maps to ID code. Mapping changes within
10 seconds after the ID device is either connected or
disconnection. If it does not change a restart of the device
may be required.
- Card
- ID code
- Card or ID code
- Card or Windows: Allows the user to log in by either card or
by typing in their Windows credentials and selecting domain
from drop-down list.
Note: Identification by card requires connecting a USB ID
Device (card reader). The option Card or Windows allows the
user to log in by either card or by entering their Windows
username, password, and domain. The SafeCom G4 server
must be a member of the domain or trusted by the domain.
o Default domain: Specify the domain to pre-fill the domain for users
when logging into a device. If using SafeCom Mobile Pull Print the
domain must be specified, as the users are not prompted for domain
when logging into a device using a smart phone. If the default
domain is not specified, but the users are required to use domains,
they can enter the domain with their username (domain\username).
o Idle timeout: Specifies in seconds when a logged in user is
automatically logged out if there's no activity.
o Hide domain: Check to allow the users to log in without specifying
the domain.
o Enable post tracking: This is relevant only with SafeCom Tracking.
Refer to SafeCom G4 Administrator’s ManualD60650
o Reverse document list: Check to show the latest printed
documents at the top of the document list.
o Mask ID code: Check to mask the ID code with asterisk (*) when
entered at the device.
 Drivers: When Pull Printing, SafeCom compares the driver name
embedded in the print job with its list of driver names. If no match is
found and if Show fidelity warning is checked in the Server properties in
the SafeCom Administrator, the document appears with a question mark
[?] in the document list. This way the user is warned that fidelity is low
and the document may print incorrectly.
o Click Get All to obtain the list of drivers from the SafeCom Server,
or add and delete drivers manually.