User Guide

2 SafeCom Go Sharp - Device server

D60709-22

 Device Properties:

o Dsk: If the Device Security Kit is installed, Dsk must be set to

True and then the addresses for Application UI and Web Service

must be entered manually on the device web page under

Application Settings, External Application Settings, and then

External Accounting Application Settings.

o NewModel: Set the property value to True if you are adding a

new Sharp model that has not yet been tested by SafeCom. The

default value is False.

o Reboot: Is set to True, which means that the device

automatically restarts. Set to False if you want to restart the

device manually.

o SSL: Set to True to use SSL.

o serviceLogin: This service password must correspond to the

service password on the device. The default is service.

o welcomeScreen: Set the property value to True if you want the

welcome screen (see below) displayed at the device before user

that is displayed for the user. The default value is 'true'.

o welcomeScreenTimeOut: Specify in seconds for when the

welcome screen should timeout. The default value is '120'.

 Device applications: Here it is specified if the users are allowed to

Email, Copy, or Scan to USB without having to log in first. Check one or

more of the three checkboxes to allow the users to perform these tasks

without authentication.

The settings in the Device applications are tied to the welcome screen

(see below). If none of the check boxes Email, Copy, or Scan to USB are

selected, then the welcome screen only shows the option to Login and if

enabled, Windows login. If one or more of three checkboxes Email,

Copy, or Scan to USB are selected the users have the option to Login and

to Copy/Scan from the welcome screen.

 Enable logging: Select if log information should be collected.

 Restore factory default sets all settings, except the password, to their

default value (refer to 2.6.8).

 Reconfigure device informs the device to reference the current SafeCom

Device Server.