User Guide

3 SafeCom Controller
D60709-22
34
5. Click External Accounting Application Settings
1
.
6. Change External Account Control to Enable.
7. Check Enable Authentication by External Server.
8. In Application Name enter SafeCom Go Sharp.
9. In Address for Application UI enter the reference to a specific file on the
connected SafeCom Controller. The address is:
http://<ip address>/soapsharp/safecom.scx
where <ip address> should be replaced with the IP address of the
SafeCom Controller.
10. In Address for Web Service enter the reference to a specific folder on
the connected SafeCom Controller. The address is:
http://<ip address>/soapsharp/
where <ip address> should be replaced with the IP address of the
SafeCom Controller.
11. Leave Timeout on 20 seconds.
1
External Accounting Application Settings menu item appears only if you have
purchased the Sharp Sharp External Account Module (MX-AMX3), which is a prerequisite
for SafeCom Go Sharp. If you install MX-AMX3 with full license, it disables the trial
license.