Dragon speech recognition Enterprise solution Client installation guide For: Guide
Dragon Client Installation Guide Copyright Dragon Professional Group, Dragon Legal Group, Dragon Law Enforcement, v15. 2018 Nuance Communications, Inc. This material may not include some last-minute technical changes and/or revisions to the software. Changes are periodically made to the information provided here. Future versions of this material will incorporate these changes.
DPG-DLG-DLE_ClientInstallationGuideCover_v1 Contents DPG-DLG-DLE_ClientInstallationGuideCover_v1 1 Copyright 2 Contents 3 Chapter 1: About this guide Guide overview 7 8 Audience 8 About Dragon 9 Physical Architecture Additional resources 9 10 Documentation 10 Interactive tutorial 11 Training 11 Support 11 Chapter 2: Preparing to install Dragon 12 Checklist—Planning the client installation 13 Preparing for an installation 14 Security considerations 15 General security principle
Dragon Client Installation Guide Initial installation 24 Natspeak.
DPG-DLG-DLE_ClientInstallationGuideCover_v1 Speech options 74 MSI options for scheduled tasks 75 Extracting MSI/MST files from the Dragon setup.
Chapter 1: About this guide Guide overview 8 About Dragon 9 Additional resources 7 10
Dragon Client Installation Guide Guide overview The Dragon Installation Guide provides information on installing and configuring the Dragon client on one or more computers. The guide is available in PDF format from the Nuance Support web site. Audience This guide is intended for IT administrators and Dragon administrators whose responsibility is to install and configure Dragon clients on one or more computers. This guide assumes you have experience in software installation and using Command Line options.
Chapter 1: About this guide About Dragon Dragon allows users to create reports, spreadsheets, presentations and other documentation more efficiently with fast, accurate dictation and transcription. Dragon also includes voice commands that allow users to perform everyday tasks without using the mouse or keyboard. For example, use voice commands to: l Correct and format text. l Launch applications. l Navigate in applications.
Dragon Client Installation Guide Additional resources The following resources are available in addition to this guide to help you manage your Dragon installation. Documentation Document Description Location Dragon Help Full online Help system that includes commands and instructions for dictating, correcting, and more with Dragon. Dragon Help. When Dragon is New features, system requirements, client upgrade instructions, and known issues. Dragon Help.
Chapter 1: About this guide Interactive tutorial Dragon includes an interactive tutorial with progressive simulations that help you learn Dragon skills. When you are connected to the internet, Dragon connects to a web-based interactive tutorial. If you don't have an internet connection, the tutorial runs locally. Training Nuance provides several Dragon training offerings, like webinars, demos, and Nuance University online training courses. For more information, see the Dragon Support web site.
Chapter 2: Preparing to install Dragon Checklist—Planning the client installation 13 Preparing for an installation 14 Security considerations 15 General security principles 15 Installing and configuring Dragon securely 16 Dragon security features 16 Nuance Management Center security features 17 Storage space considerations 19 Assigning access 20 Assigning permissions for Roaming users Preparing client workstations Turning off Windows Automatic Updates Dragon system requirements 12 20 21
Dragon Client Installation Guide Checklist—Planning the client installation Use this checklist to help you prepare for client installations. Task Reference Set default options at the site and group level for PowerMic settings and hot keys in the NMC console (NMS mode only). Nuance Management Center Administrator Guide Create Sites, Groups, and Users and assign licenses in the NMC console.
Chapter 2: Preparing to install Dragon Preparing for an installation Before installing, modifying, or upgrading Dragon: l l Install any pending Windows updates, and then restart the computer. Turn off or disable any antivirus software until installation is complete. Installation can sometimes trigger a false virus report. l Close all open applications. l Read “Checklist—Planning the client installation” on page 13. l Ensure your system meets the requirements before attempting to install Dragon.
Dragon Client Installation Guide Security considerations When your organization implements Dragon, it is critical to install the software and its system components using secure installation methods to protect the integrity and confidentiality of your data. It is equally important to manage and monitor your system once installed to ensure that your data is protected from unauthorized access and misuse.
Chapter 2: Preparing to install Dragon Installing and configuring Dragon securely The Dragon installation instructions include procedures that install the application and system components into a secure state by default. In addition to performing the standard installation procedures, you can do the following to secure your data. l Secure your DRA files. A DRA file contains acoustic data (audio and text transcripts) from your dictation.
Dragon Client Installation Guide l Disable use of Advanced Scripting Commands l Do not allow restricted users to modify vocabularies For more information, see the "Administrative Settings dialog box—Miscellaneous tab" topic in the Dragon client Help. Nuance Management Center security features If you are using a Dragon edition where Nuance Management Center/NMS mode is enabled, you can use the following security features in Nuance Management Center.
Chapter 2: Preparing to install Dragon Assigning privileges Privileges determine the ribbons, menus, and options that users can access in the NMC console. You assign or unassign privileges to show or hide those options. You should assign the least amount of privileges that users require to perform all tasks relevant to their job responsibilities.
Dragon Client Installation Guide Storage space considerations Each Dragon user must have his or her own user profile. This is a set of files in which Dragon stores information about each user’s voice, frequently-used words and phrases, optional settings, and custom commands (if applicable). Each computer on which Dragon is installed must have enough free space for the required user profile(s). Use the following guidelines for allocating disk space on your system.
Chapter 2: Preparing to install Dragon Assigning access To ensure that your Dragon network components can communicate with each other and that the network can function properly, you must assign permissions to all directories and access rights to administrator and user accounts on servers and clients as indicated below.
Dragon Client Installation Guide Preparing client workstations Turning off Windows Automatic Updates After you set up each physical server or workstation, turn off Windows Automatic Updates. For each update Windows sends, install it first on a single test machine; update other machines only after you have determined that it does not disrupt the network.
Chapter 2: Preparing to install Dragon Dragon system requirements During the installation process, the software checks that your system meets the following requirements. If they are not met, Dragon is not installed. RAM Minimum: l CPU Free hard disk space Supported operating systems Other 4 GB for all operating systems. Minimum: 2.2 GHz Intel® dual core or equivalent AMD processor. Faster processors yield faster performance.
Chapter 3: Initial Installation of Dragon Install Dragon and choose the default settings 23 24 Initial installation 24 Natspeak.
Dragon Client Installation Guide Install Dragon and choose the default settings Install Dragon on the client computer using the installation DVD. If you plan to install Dragon on multiple computers, run through an initial installation before attempting to install Dragon from a server. Use the initial client installation to set default values for Administrative and Auto-Formatting options. You can then install Dragon on other computers using the same options.
Chapter 3: Initial Installation of Dragon NMC users—Only options in the Commands tab are saved to the NMC server. All other settings are saved locally. l Auto-Formatting—Select the Auto-Formatting options. NMC users—Administrators can also control these settings in the NMC console. l Advanced—Select default settings on the following tabs: l Roaming (Stand-alone mode only)—Optionally enable and configure the Roaming feature. Note: Some Roaming settings are saved in roamingdef.ini.
Dragon Client Installation Guide To create or modify nsdefaults.ini, perform the following steps on the workstation where you created the initial installation of Dragon: 1. Close Dragon if it is running. 2. Open a Command Prompt window: l l l Windows 7: Start > All Programs > Accessories > Command Prompt Windows 8.1: From the Start screen, click the down arrow to show all apps, and then scroll to Windows System > Command Prompt Windows 10: Start > All apps > Windows System > Command Prompt 3.
Chapter 3: Initial Installation of Dragon Switch Function /SetAdministrativeOptions Opens Administrative Options dialog box to change settings for the current installation. This switch does not affect nsdefaults.ini. Changes are saved for the local installation only. /About Shows the About dialog for the Dragon client. /User Opens the specified user profile (Stand-alone mode only) /User Logs the user in to the Dragon client (NMS mode only).
Chapter 4: Installing the Dragon client with settings Overview—Installing the Dragon client with initial settings 29 Prerequisites 29 Installation methods 29 Push installations 29 Support for SMS and Windows Server with Active Directory 30 Installing the same Dragon configuration on multiple computers 31 Performing an administrative installation with a batch file 32 Understanding the script in admininstall.bat 32 Modifying admininstall.bat 33 Command Line installation with msiexec.
Dragon Client Installation Guide Overview—Installing the Dragon client with initial settings Use command line options to copy the settings you created in the initial Dragon installation to all your Dragon client installations. Prerequisites Before installing the Dragon clients: Have the Dragon serial number available. If you are installing or upgrading Dragon on multiple networked computers, have the group serial number available.
Chapter 4: Installing the Dragon client with settings Several servers support this type of network installation: l l l l Windows Server 2008 R2 and 2012 x64 Windows Server 2016 System Management Server (SMS) Active Directory Dragon supports the Active Directory Assign to Computers installation option. For an administrative installation, the administrator creates an image of the installation program on the server and then configures the server to automatically push the application onto the client systems.
Dragon Client Installation Guide Installing the same Dragon configuration on multiple computers Use the following procedure to install with setup.exe in the command line from a single client machine. Note: When you are using the setup.exe method, you must ensure that all flags and properties are within the same set of quotes, directly after /v, without a space. 1. Open a Command Prompt: l l l Windows 7: Start > All Programs > Accessories > Command Prompt Windows 8.
Chapter 4: Installing the Dragon client with settings Performing an administrative installation with a batch file A simple way to install Dragon from the command line is to perform an administrative installation using a .bat file. A script for performing a full administrative installation is provided in the admininstall.bat file included with your installer. Caution: Only advanced administrators should perform an administrative installation. To run the batch file: 1.
Dragon Client Installation Guide l /qb – Indicates a basic user interface display during the installation process. l TARGETDIR – Indicates the target directory for an administrative installation. l /L – Indicates the type of data that should be included in the log and where the log is saved. A silent installation of Dragon does not display any messages. Check the setup log for any installation messages or errors.
Chapter 4: Installing the Dragon client with settings Command Line installation with msiexec.exe Another way to install Dragon from the command line on several client computers is to use the msiexec.exe program from Microsoft. The compiled MSI file, Dragon 15.msi, is located on your installation DVD. You can double-click the .msi file to start the InstallShield Wizard. However, to take advantage of available command line options, use the command line installation process described below.
Chapter 5: Configure the Dragon Client for Nuance Management Center Associating Dragon clients with the Nuance Management Center server or Local Authenticator 36 Converting from Stand-Alone mode to NMS mode 37 35
Dragon Client Installation Guide Associating Dragon clients with the Nuance Management Center server or Local Authenticator To allow Dragon clients to work with Nuance Management Center, you must enable Nuance Management Center/NMS mode on each client. You can set up the connection during your initial installation (for more information, see “Initial installation” on page 24) or follow the steps below to manually enable Nuance Management Center/NMS mode.
Chapter 5: Configure the Dragon Client for Nuance Management Center Converting from Stand-Alone mode to NMS mode If your organization decides to purchase Nuance Management Center after configuring Dragon for Stand-Alone use, you must configure all Dragon clients to connect to Nuance Management Center. Use one of the methods below to convert your clients. The methods require modifying the default Dragon settings in nsdefaults.ini. For more information on nsdefaults.ini, see “Modifying nsdefaults.
Appendix A: Modifying nsdefaults.ini Dragon client settings in nsdefaults.
Dragon Client Installation Guide Dragon client settings in nsdefaults.ini Many Dragon client settings are included in the nsdefaults.ini file you created when configuring your initial installation (see “Installing the client” on page 1 or “Natspeak.exe Command Line options” on page 25). The settings that are included vary based on the options you chose to configure during this initial configuration. You can manually revise the settings in nsdefaults.
Appendix A: Modifying nsdefaults.ini Option Description and user interface equivalent Formatting enabled: Caps Lock key overrides capitalization commands Caps Lock Overrides Caps Commands=1 Formatting disabled: Caps Lock Overrides Caps Commands=0 If enabled and with the keyboard Caps Lock key turned on, all Dragon capitalization commands are turned off. For more information on capitalization commands, see Capitalizing text.
Dragon Client Installation Guide Option Description and user interface equivalent Formatting disabled: If disabled, Dragon does not abbreviate titles automatically. ;(AbbreviationTitle) Abbreviate tit&les Default: Disabled AbbreviationTitle=0 Formatting enabled: Phone numbers check box: ;(PhoneNumber) Phone num&bers If enabled, Dragon formats sequences of digits as phone numbers.
Appendix A: Modifying nsdefaults.ini Option Description and user interface equivalent Formatting disabled: If disabled, Dragon does not format currency automatically. ;(Price) &Prices Default: Enabled Price=0 Formatting enabled: Times check box: ;(Time) &Times If enabled, Dragon automatically formats standard or military times. Formatting disabled: ;(Time) &Times If disabled, Dragon transcribes times exactly as spoken with no formatting.
Dragon Client Installation Guide Option Description and user interface equivalent Formatting enabled: "million" instead of ",000,000" check box: ;(NumberHalfFormatted) "million" instead of ",000,000 If enabled, Dragon writes the word “million” instead of six zeros when users dictate round numbers in the millions. Formatting disabled: ;(NumberHalfFormatted) "million" instead of ",000,000" If disabled, Dragon writes 1,000,000.
Appendix A: Modifying nsdefaults.ini Options dialog If you selected Modify the application’s settings for all user profiles during your initial install, or used the natspeak.exe /SetDefaultOptions command to configure default client options, the [options.ini Options] section appears in your nsdefaults.ini file. The exact settings you see may vary based on the tabs you visited while changing default settings. For more information on Options dialog settings, see the Dragon help.
Dragon Client Installation Guide Option Description and user interface equivalent Dialog=0/1 If set to 1, Dragon plays back dictation automatically when the user corrects dictated text. Default: 0 (deselected) If set to 0, Dragon does not play back dictation when users correct text.
Appendix A: Modifying nsdefaults.ini Option Description and user interface equivalent Default: 2 box: Sets the speed of mouse movement when using mouse motion commands. Use a number between 1 (slowest) and 25 (fastest). Enable IE Support=0/1 Enable HTML support check box: Default: 1 (selected) If set to 1, allows Dragon to work with Internet Explorer and Chrome.
Dragon Client Installation Guide Option Description and user interface equivalent Start Web Search=0/1 Enable Web search commands check box: Default: 1 (selected) If set to 1, enables Web searching commands based on natural speech. For example, “Search the web for weather in Seattle.” If set to 0, disables web searching commands. Start Desktop Search=0/1 Enable Desktop search commands check box: Default: 1 (selected) If set to 1, enables Desktop searching commands based on natural speech.
Appendix A: Modifying nsdefaults.ini Option Description and user interface equivalent Show disambiguation numbers=0/1 Enable multiple text matches check box: Default: 1(selected) If set to 1, enables Dragon to find multiple matches to text matching commands. If set to 0, Dragon finds only the matching text instance closest to the cursor position.
Dragon Client Installation Guide Option Description and user interface equivalent enx Use Natural Language Commands=0/1 If set to 1, enables Natural Language Commands. This feature requires an additional 8 MB of memory. Default: 1 If set to 0, disables all Natural Language Commands. Disable NLP support=0/1 If set to 0, enables application-specific Natural Language Commands. Default: 0 If set to 1, disables application-specific Natural Language Commands.
Appendix A: Modifying nsdefaults.ini Appearance settings Option Description and user interface equivalent DragonBar Determines the location and appearance of the DragonBar. The options are: DragonBar Mode=5 l l DragonBar Mode=0 l DragonBar Mode=0 l l DragonBar Docked Mode=1 l DragonBar Mode=2 Modern DragonBar (5)—The Modern DragonBar appears at the top of your screen. Classic DragonBar: Docked to Top (0)—The Classic DragonBar appears docked to the screen’s edge.
Dragon Client Installation Guide Option Description and user interface equivalent If set to 0, the Modern DragonBar remains expanded at all times. Note: If DragonBar Mode is not set to 5, this setting is ignored. Results Box Results Box Pinned=0/1 Anchor check box: Default: 0 (deselected) If set to 1, the Results box is locked in place until the user drags it to a new location. If set to 0, the Results box appears with the text as the user dictates.
Appendix A: Modifying nsdefaults.ini Hot keys settings Note: Hot keys are noted in the format , . Modifier keys are noted as follows: No modifier=0; Shift=1; Alt=2; Ctrl=4 Option Description and user interface equivalent Microphone Hot Key= , Microphone on/off key combination: Turns Dragon’s microphone on and off. Default: 107,0 {NumKey+} Correction Hot Key= , Correction key combination: Opens the Correction menu.
Dragon Client Installation Guide Option Description and user interface equivalent Default: 109,1 {Shift+NumKey-} Fast Playback Hot Key= , Fast Playback key combination: Increases the playback speed. Default: 106,1 {Shift+NumKey*} Select Next Variable Hot Key= , Default: 78,5 {Ctrl+Shift+N} Transfer Text Hot Key=, Next Field key combination: Selects the next variable field (Voice field) in an Auto-text.
Appendix A: Modifying nsdefaults.ini Option Description and user interface equivalent Default: 150 Sets the rewind speed. Monkey Cheater On=0/1 Play Rewind/Fast-Forward sound check box: Default: 1 (selected) If set to 1, Dragon plays a sound when you fast forward or rewind a selection. If set to 0, Dragon does not play a sound. Text-to-speech attributes [local.ini Options] TTS Volume=<0-255> Volume slider: Default: 255 Sets text-to-speech playback volume.
Dragon Client Installation Guide Option Description and user interface equivalent enx Use Active Accessibility=1 excluding check box: Option disabled: enx Use Active Accessibility=0 If set to 1, users can control user interface elements by voice. If set to 0, voice control of user interface elements is disabled for all applications. To turn off voice control in specific applications, use the drop-down menu or the Tracking Disabled App List setting.
Appendix A: Modifying nsdefaults.ini Option Description and user interface equivalent Disconnection=1 If set to 1, a warning appears when a Dragon compatibility module for a supported application becomes disabled. Compatibility modules enable Full Text Control. Option disabled: If set to 0, no warning appears. Alert On Compatibility Module Disconnection=0 Default: Selected Option enabled: Setting does not apply to Dragon.
Dragon Client Installation Guide Option Backup Frequency= Default: 5 Description and user interface equivalent l 0=Never l 1=Ask me l 2=Always Automatically back up user profile every saves number box check box: Determines how often Dragon backs up user profiles when the user saves them. Note: This option is ignored if you set Disable Back Up User Profiles=1.
Appendix A: Modifying nsdefaults.
Dragon Client Installation Guide Global context Dictation Box context Code Default Code Default Mouse Right 1 17 39 (Right click) 4 17 39 (Right click) Trigger 1 18 38 (Left click) 4 18 38 (Left click) 1 19 0 (Enabled) 4 19 0 (Enabled) Button (underneath) Enable touchpad swipe Consult the table below for available actions to be triggered by the PowerMic buttons.
Appendix A: Modifying nsdefaults.ini [options.ini PowerMic Buttons NMS] 18 1 11=22 ... [options.
Dragon Client Installation Guide Administrative Settings dialog If you selected Modify the administrative settings during your initial install, or used the natspeak.exe /SetDefaultAdministrativeOptions command to configure default client options, the [nssystem.ini Settings] section appears in your nsdefaults.ini file. For more information about Administrative Settings dialog settings, see the Dragon help.
Appendix A: Modifying nsdefaults.ini Option Default: 1 (deselected) Description and user interface equivalent If set to 1, users cannot create or edit step-by-step custom commands. Users can still run the commands, however. If set to 0, users can create and edit step-by-step commands. Global MyCommands VBA Scripting=0/1 (Stand-Alone only) Default: 1 (deselected) Disable use of Advanced Scripting commands check box: If set to 1, users cannot create or edit scripting custom commands.
Dragon Client Installation Guide Description and user interface equivalent Option (Stand-Alone only) selection in Acoustic Optimizer check box: Default: 1 (deselected) If set to 1, Acoustic Optimization cannot automatically select an acoustic model that more closely matches the user’s accent. If set to 0, Acoustic Optimization selects a different acoustic model automatically if necessary.
Appendix A: Modifying nsdefaults.ini Options Description and user interface equivalent profile directory. Roaming User Master Directory= "" Address field in the Roaming User Network Location dialog box: Default: None Sets the location of the Master Roaming user profile. Roaming User Partial Path= Roaming User Local Cache Directory="" Default: None Local directory (for cache) field: Sets the location of the locally cached Roaming user data. Example: C:\Program
Dragon Client Installation Guide Options Description and user interface equivalent user corrections are available after the user closes and reopens the user profile. If set to 0, Dragon does not save acoustic information with the local user profile. Roaming User Prompt Before Saving=0/1 Default: 0 (deselected) Prompt before saving to network location check box: If set to 1, Dragon displays a dialog box allowing users to choose where to save user profiles.
Appendix A: Modifying nsdefaults.ini Options Description and user interface equivalent Default: 1 (selected) If set to 1, Dragon incorporates the contents of the local vocdelta.voc file into the Master Roaming user profiles when the vocdelta.voc file reaches 90% of its maximum size (1 GB). After incorporating the contents of the file into the Master Roaming user profile, Dragon clears that data from the local user profile.
Dragon Client Installation Guide Options Description and user interface equivalent ASW Override and Roaming ASW Override should always have the same setting. NMS settings For information on installing and configuring the NMC server, see the Nuance Management Center Server Installation and Configuration Guide. Option Description and user interface equivalent Connect To NMS=0/1 Enable NMS check box: Default: 0 (deselected) If set to 1, enables Nuance Management Center/NMS mode.
Appendix B: Options for MSI installations MSI properties for Dragon installations Sample command lines Feature variables to set through the ADDLOCAL or ADVERTISE properties Speech options 69 72 73 74 MSI options for scheduled tasks 75 Extracting MSI/MST files from the Dragon setup.
Dragon Client Installation Guide MSI properties for Dragon installations This section describes the msiexec.exe properties that apply to Dragon. For information on Windows Installer-defined properties, see the Microsoft Dev Center for Windows Installer: https://msdn.microsoft.com/en-us/library/windows/desktop/aa370905.aspx. Syntax l To install using msiexec.exe, use the syntax: msiexec.exe /i "Dragon 15.msi" = l To install using setup.exe, put all msiexec.
Appendix B: Options for MSI installations Options Description not appear during installation. 1: (Default) Selected. The Administrative Settings dialog box appears during installation. SETFORMATTINGS=0/1 Optional Sets the default state of the Modify the formatting options for all users check box in the Advanced dialog of the Installer. 0: Deselected. The Auto-Formatting dialog box does not appear during installation. 1: Selected. The Auto-Formatting dialog box appears during installation.
Dragon Client Installation Guide Options Description 0: (default) Disables Active Directory single sign-on; sets radio button to Provide a login name and password. 1: Enables Active Directory single sign-on; sets radio button to Use Windows single sign-on. INSTALLDIR="" Sets the installation directory to the specified location. For an administrative installation, pass the TARGETDIR option instead of the INSTALLDIR option.
Appendix B: Options for MSI installations Options Description required to take this action during upgrading; however, you should be familiar with the entire upgrade procedure before proceeding with this option. /L "\logfile.log" Creates an installation log in the specified location. To log all information, including verbose output, enter /L*v. You can send this log to Nuance Technical Support should any issues occur. For available parameters, see https://technet.microsoft.
Dragon Client Installation Guide Feature variables to set through the ADDLOCAL or ADVERTISE properties You can specify any of the features in the table below using ADDLOCAL and ADVERTISE properties on the command line. For example: ADDLOCAL=NatSpeak,TTSENU,ENU When specifying features on the command line: l l If a feature does not exist in a particular edition or language, overriding its default property has no effect. Some features (such as Text-to-Speech) have sub-features.
Appendix B: Options for MSI installations Speech options You can also add or advertise the following datapacks.
Dragon Client Installation Guide MSI options for scheduled tasks Note: Take the following actions on the client computer. Do not perform them on the computer where you performed the initial installation and configured default option settings. You can include an additional option on the command line to run one or more of the following tasks on a particular schedule: l l l Acoustic model optimization (ACO)—This task optimizes the acoustic models used to interpret the user’s speech.
Appendix B: Options for MSI installations Extracting MSI/MST files from the Dragon setup.exe Some minor releases of Dragon do not include an MSI file. Instead, the file is part of the setup.exe file. You can run silent installations from the command line with msiexec.exe or setup.exe—you don’t need to extract the .msi and .mst files. Use the following information if you are comfortable using .msi installers. Using .MST files, you can tailor the MSI installation without changing the setup.
Dragon Client Installation Guide Option Description 1043=Dutch TARGETDIR="C:\xyz" 77 Use with administrative installations only. Indicates the full path to where the image of Dragon will be installed.
Appendix C: Using Dragon over a remote desktop connection Remote desktop connection support 79 Configuring the Windows server 81 Configuring the Dragon clients 85 78
Dragon Client Installation Guide Remote desktop connection support To transmit audio from the client computer to a server running Dragon through a Remote Desktop Connection, you must: l Enable the audio recording option on the remote client software. l Enable the audio recording redirection policy on the server. To use the PowerMic over the RDC connection, install the PowerMic Button Control application to enable button support.
Appendix C: Using Dragon over a remote desktop connection l l Software: Remote Desktop Connection 6.1 (RDP 6.1) or higher. The RDP 8 download is available at https://support.microsoft.com/en-us/help/2592687/remote-desktop-protocol-rdp8-0-update-for-windows-7-and-windows-serve and works for all operating systems. Network: l l 100 Mbps connection speed Network bandwidth required per active user is 1.
Dragon Client Installation Guide Configuring the Windows server Install Dragon on a supported server operating system. For information on installing Dragon, see “Initial installation” on page 24. When you have installed Dragon, do the following for your server: l l l Windows Server 2008 R2—See “Configuring Windows Server 2008 R2” on page 82. Windows Server 2012 R2 or Windows Server 2016—See “Configuring Windows Server 2012 R2 or Windows Server 2016” on page 81.
Appendix C: Using Dragon over a remote desktop connection 15. Confirm your selections, and then click Install. 16. If a dialog box appears asking you to allow automatic restarts, click Yes. The Installation Progress screen displays the status of the installation. 17. When the installation is complete, verify that the installation was successful. 18. Click Close. 19. Restart the computer, even if the server was not restarted automatically. Configure the local group policy on the server 1.
Dragon Client Installation Guide 5. Select Remote Desktop Services, and then click Next. The Remote Desktop Services screen appears. 6. Click Next. The Select Role Services screen appears. 7. Select Remote Desktop Session Host, and then click Next. The Uninstall and Reinstall Applications for Compatibility screen appears. 8. Click Next. The Specify Authentication Method for Remote Desktop Session Host screen appears. 9. Click Next until you reach the Configure Client Experience screen. 10.
Appendix C: Using Dragon over a remote desktop connection 4. Choose your preferred configuration to allow remote connections. 5. Click OK. 6. Proceed to “Configuring the Dragon clients” on page 85. Configuring other server operating systems Do the following to configure Remote Desktop Connection on Windows 7 Ultimate and Enterprise, Windows 8 Professional and Enterprise, or Windows 10 Professional, Enterprise and Education: 1. Open the Control Panel. 2. Open System Properties. 3. Click the Remote tab. 4.
Dragon Client Installation Guide Configuring the Dragon clients To enable audio redirection through a remote desktop connection and to allow users to connect and use Dragon through a Remote Desktop Connection, you must install and configure the Dragon Client for Remote Desktop on each client computer that needs to connect to Dragon on the server. 1. In Windows Explorer, navigate to the Dragon installer DVD. 2. Open the DragonClientForRemoteDesktop folder. 3. Double-click to run setup.
Appendix C: Using Dragon over a remote desktop connection Using Dragon on a Server Operating System l To use the PowerMic over a remote desktop connection, select the USB microphone type when creating a new user profile. When using the USB dictation source, you must use the PowerMic Button Control application to configure PowerMic hot keys. l The Remote Audio suggested for the user profile is the default microphone on your client computer.
Appendix D: Working with edit controls Enabling Full Text Control in WPF edit controls An administrator can enable Full Text Control in WPF edit controls. In the installation folder, navigate to the Program folder and run ToggleFullTextControlWPF.exe You must have administrator privileges to run the .exe file. After you run the .exe file, the .
Dragon Client Installation Guide Edit Control Description Supported INKEDIT A Microsoft edit control Yes McKesson Paragon McKesson Corporation Yes Meditor A Meditech edit control Yes RichEdit20A A Microsoft rich edit control Yes RichEdit20W A Microsoft rich text box edit control Yes RichEdit50W (Word Pad) A Microsoft rich edit control Yes RichEdit20WPT A Microsoft Outlook edit control Yes RichTextWndClass A Microsoft RichTextBox edit control Yes TEdit An edit control from Borlan
Appendix D: Working with edit controls Edit Control Description Supported TX19 / TXedit19 A TX text control from Text Control GmbH Yes TX32 / TXedit32 A TX text control from Text Control GmbH Yes Word A Microsoft Word edit control Yes (up to 2016) WPF A Windows Presentation Framework edit control Yes 89
