User's Manual

Table Of Contents

NUCTECH COMPANY LIMITED

V Guidance for setting smart lock

．

The door can be unlocked by any fingerprint or password in the initial state, so it is necessary to

enter the Administrator password in time to enter the administration mode for the follow-up

operations. The first Administrator password of this smart lock can be registered by pressing the

setting key on the back surface plate. After operation, enter 6-12-digit password and press [#],

according to the indication “Please Add Administrator Password”. When the recognition is

successful, there will be an indication "Enter Again". The password entered for the second time

must be the same with the first time. When the password is added successfully, there will be an

indication "Add Success" and the LED indicator light will be on in green. At this moment, you have

been authenticated to be first owner of the lock, and you can continue to operate it. The specific

operations are as follows:

The specific adding process is as follows:

Admin PW 01

Add Success

Add Admin PW 01

Enter Again

Add Admin PW 01

Enter Password

Welcome

00:00:00

2016-01-01

2． How to enter the administration mode and display the menu indexes

Open the sliding cover, press the setting key on the back surface plate, and there will be a voice

indicating "Please Verify the Administrator Fingerprint or Enter the Administrator Password". Enter

the Administrator password registered before to enter the administration interface. The concrete

operations are similar to the steps of registering the first Admin fingerprint. The LCD menu indexes

are as follows:

Setting key on

the back plate

first password