User's Manual

NUCTECH COMPANY LIMITED
8
Add Admin FP
Add User FP
Add Temp FP
Add Fingerprint
Add Password
Add Card
Add Admin PW
Add Temp/User PW
Add Card
Del Admin FP
Del User FP
Del Temp FP
Add User
Del User
System Settings
Record Inquiry
Del Fingerprint
Del Password
Del Card
Del Admin PW
Del Temp/User PW
Del Card
Set Time
Open Mode
Normally Open
Store status
Voice Setting
Language
Restore Factory
Information
Record Inquiry
V Guidance for setting smart lock
3． Add user
3.1 Add fingerprint
Enter the administration mode, and press the direction key to move the marquee up and down. Confirm
the selection by pressing [#] when the marquee stays at [Add User]. Select [Add Fingerprint] by the same
method. The smart lock can store 199/170 fingerprints (10 administrator fingerprints, 160 user
fingerprints and 0/29 temporary fingerprints).
3.1.1 Add fingerprint
The Administrator fingerprints have the permission to enter the administration mode, under which the
door can be unlocked in the common mode and security mode, and can be unlocked when it is locked
back inside. Select the fingerprint ID to be added according to the direction key, and confirm it by
pressing [#]. After successful addition, there will be an indication "Add Success" and LED indicator light
will be on in green. The specific adding process is as follows: