User's Manual

NUCTECH COMPANY LIMITED
10
V Guidance for setting smart lock
Modify Admin PW
Enter Password
Add User
Del User
System Settings
Record Inquiry
Add Fingerprint
Add Password
Add Card
Modify Admin PW
Add Temp/User PW
Admin PW
Modify Success
Modify Admin PW
Enter Again
3.2.2 Add user password:
The user password has the same permission with the user fingerprint. Please refer to modifying
Administrator password and adding user fingerprint for the specific addition steps, which are
described briefly here. The new adding process is as follows:
Add User
Del User
System Settings
Record Inquiry
Add Fingerprint
Add Password
Add Card
Add Admin PW
Add User PW
Please Select ID
User PW ID: 02-10
ID: 02/10
Add User PW
Enter PW
Add User PW
Enter Again
User PW ID: 02
Add Success
▲3.3 Add card
The card is optional. The adding process is similar to that of adding fingerprint and password. The
adding process is as follows.
Add User
Del User
System Settings
Record Inquiry
Add Fingerprint
Add Password
Add Card
Please Select ID
ID: 001/100
ID (001-100)
Add Card 001
Please swipe
User Card: 001
Add Success
4. Delete user
4.1 Delete fingerprint
Save at least one group of Admin fingerprints while deleting fingerprints. The concrete operations
are similar to adding fingerprints. Select the fingerprint ID to be deleted through the direction key,
and press [#] for confirmation. After confirmation, there will be an indication “Yes/No”. Move the
cursor to [Yes], press [#] to confirm the deletion. The LED indicator light will turn green after the
deletion is successful. The deleting process is as follows: