Technical Specifications
V-1
Cap for
.090” Panel
(.5”/.9” Legs)
V-3
Division Bar for
.090” Panel
(.88” Face)
V-3WF
Division Bar for
.090” Panel (wide
ange) (.75” Face)
Also for .120” panel
V-5
Inside Corner
and Cove for
.090” Panel (.63”
Cove/.70” Leg)
V-7
Outside Corner
for .090” Panel
(.5” Legs)
V-9
Division Bar for
3/8” Panel
(1” Face)
V-11
“T” Bar
(1.25” Face/
.375” Leg)
V-13
Inside Corner
Angle
1 1/4” x 1 1/4”
V-15
Outside Corner
Angle
1 1/4” x 1 1/4”
V-17
Cap for 5/8”
Panel
(.4” Legs)
V-19
Cap for 3/8”
Panel
(.5”/1” Legs)
V-21
Inside Corner for
3/8” or 1/2” Panel
(1.12” Cove)
V-23
Outside Corner
for 3/8” Panel
(.75” Legs)
V-25
Batten Strip
(1.5” Face)
V-29
Two-piece
Division Bar -
Face Mounting
(1.6” Face)
V-31
Divison Bar for
1/4” Panel
(.88” Face)
V-33
Two-Piece Inside
Corner and Cove
(1.25” Cove)
V-35
Inside Corner
Angle 2” x 2”
V-37
Outside Corner
Angle 2” x 2”
V-39
Division Bar for
5/8” Panel
(1.12” Face)
V-41
Cap for 1/2”
Panel
(.5”/.9” Legs)
V-43
Division Bar for
1/2” Panel
(1.12” Face)
V-45
“T” Bar Dual
Durometer (2”
Face/.625” Legs)
White #50 Only
V-47
Two-piece
Division Bar for
.090” Panel
(1.6” Face)
V-49
Cap for 2” Foam
Panel
(1” Legs)
V-51
Divider for 2”
Foam Panel
(2” Face)
V-53
Cap for 5/8”
Panel (.75”/1.3”
Legs)
V-55
Two-Piece
Division Bar
(1.38” Face)
(3/8”,1/2”,5/8”
Panels)
V-57
Two-piece
Division Bar
(1.38” Face)
(3/4”, 7/8” or 1”
Panels)
V-59
“T” Bar Dual
Durometer
(1” Face/.375”
Leg)
White #50 Only
V-61
Cap for 1” Panel
(.5” Legs)
V-63
Cap for 1/4”
Panel (.44”/.75”
Legs)
V-65
Base Cove 3”
V-67
Cap for 3/4”
Panel (.375”
Legs)
V-71
Cap for 1 1/2”
Panel (1” Legs)
V-103
Slot Wall Insert
(1.25” Face)
V-109
Cap for 1” Panel
(1” Legs)
V-113
Cap for 3/8”
Panel
(.42” Legs)
V-115
Cap for 1/2”
Panel (.42” Legs)
V-117
“T” Bar (1.5”
Face/.375” Leg)
V-119
1/4” Division Bar
for Foam Panels
V-121
Inside Corner
Angle
1 1/2” x 1 1/2”
V-123
Outside Corner
Angle
1 1/2” x 1 1/2”
V-125
Large Inside
Corner for .090”
to .125” (.75”
Cove/1” Leg)
V-127
Large Outside
Corner for .090”
to .125”
(.625” Leg)
V-129
Division Bar for
1” Panel
V-133
Two-pc Div. Bar
for 1.5” to 2”
(2.06” Face)
V-135
Two-piece
Outside Corner
(1.1” Angles)
V-137
Division Bar for
.136” to .170”
Panels (1” Face)
V-139
“T” Bar (2”
Face/.840” Leg)
V-143
Two-Piece Inside
Corner Ceiling
Cove for 1 1/2” to
2” Ceiling Panel
(1” Face)
White #50 Only
V-149
Outside Corner
Angle
1/2” x 1/2”
V-151
Outside Corner
Angle
3/4” x 3/4”
V-153
Batten Strip
1.5” Face
V-161
Cap for .200”
Alumacorr Panel
(.350 Face/.42”
Legs)
V-163
Cap for .320”
Alumacorr Panel
(.465” Face/.42”
Legs)
V-165
Cap for .400”
Alumacorr Panel
(.565” Face/.42”
Legs)
V-167
Outside Corner
Angle 2” x 4”
V-169
Two-piece Inside
Corner and Cove
(Face Mounting)
V-171
Inside/Outside
Corner for .090
V-177
Inside Corner
Angle (135°)
1 1/2” x1 1/2”
V-179
Outside Corner
Angle (135°)
1 1/2” x 1 1/2”
V-187
“T” Bar Dual
Durometer (1.75”
Face/.375” Leg)
White #50 Only
Vinyl Moldings
8’, 10’ and 12’ Lengths are available
Custom lengths, colors, and proles are available upon request
(minimums and extra costs may apply)
◊
◊
© Nudo Products, Inc., 2012 Printed in USA
NOTE: Above molding proles are not to scale
* NOTICE: Panels and components made of aluminum, polystyrene foam, vinyl, and wood may be combustible, and accordingly should be used in compliance with local codes and insurance regulations.
**Nonwarranty: The information contained in this literature is presented in good faith and is believed to be accurate, but without guarantee. Conditions of use are beyond our control and all risks are assumed by the
user. Nothing herein is a recommendation for uses which infringe valid patents or as extending a license under valid patents.