Use and Care Manual

Bluetooth Pairing

Using your BE6i for first time

Pairing BE6i with source device

1. Press and hold the BE6i’s Power/Function button for 6 seconds

until the LED indicator light flashes blue/red. Your BE6i is now in

pairing mode.

2. Turn on Bluetooth® on your source device, then select “Optoma

NuForce BE6i” once it appears on the device list.

NOTE: Consult your source device’s user manual for instructions on activating

Bluetooth.

3. Once successfully paired, the LED indicator will flash blue and

you hear “Primary device connected” (when voice prompt enabled)

from your BE6i, or a beep if voice prompt is not enabled.

Please note:

A. You must always enter “Pair” mode from a powered-off state.

Otherwise, pushing the Power/Function button for more than 3

seconds from a powered-on state turns the BE6i off.

B. If left inactive in pairing mode, your BE6i will automatically power