Use and Care Manual

8
off after 3 minutes.
C. Your BE6i can store pairing information for up to eight devices.
To pair additional devices to your BE6i ensure that your BE6i is
not concurrently connected to any device, then repeat the steps
1,2,3 outlined above.
In case where your BE6i have already stored pairing information
for eight devices and a ninth device is paired, the stored
information for the very first device will be deleted.
Power On/Power Off
To power on your BE6i, press Power/Function button for about 3 seconds
until the LED indicator flashes blue and you hear the “Power on” when
voice prompt is activated or a beep if the voice prompt is not used.
NOTE:
Once you have successfully paired the BE6i to a Bluetooth-enabled device,
the BE6i will automatically connect with that device once it is powered
on again. For more information check “Bluetooth Pairing” section.
If you have stored pairing information for multiple devices and more than
one of those devices is Bluetooth enabled, the BE6i will automatically
connect with the most recently paired device and will also enable
multipoint connection.
For more information read section “Multipoint Connections”.