BE Free5 Truly Wireless Premium Earphones User Manual Regulatory model name APBEFREEU Version V 1.
Contents WHAT’S IN THE BOX BE Free5 EARPHONES THE BASICS Charging your BE Free5 Battery Low Alarm and Battery Status Bluetooth pairing Power On/ Power Off Wearing your BE Free5 Handling phone calls and Siri/Google Assistant Listening to music MISCELLANEOUS Restoring factory settings Voice prompts list Disclaimer FCC Interference statement CE Specification 1
WHAT’S IN THE BOX Item BE Free5 earphones Silicon tips CP350 (in L/M/S), CP100Z (in SS), Total of 4 pairs ear tips Wings (in L/M/S), Total 3 pairs (another pair on the BE Free5) Charging case Charging cable (Micro-USB) Basic user’s manual Safety Instruction 2
BE Free5 EARPHONES 3 1 2 4 1. Charging pins 2. Multifunction button (MFB) 3. Microphone (on the R earpiece) 4.
The BASICS Charging Your BE Free5 Although your BE Free5 earphones come with a partially charged battery, it is recommended that you fully charge your BE Free5 and the charging case before first use. Note: Please remove the film between charging pins and the earpieces in the case before you charge. 1. Put your BE Free5 into the charging case (1). The USB charge cable should be connected to the charge port on the charging case (2) and to either a PC or a dedicated USB charger. 2.
Open the top cover, check left LED. If the left LED indicator is white, the battery is more than 25% capacity, If the left LED indicator is orange, the battery is less than 25% capacity. It is strongly recommended that you charge the charging case immediately when the LED indicator turns orange. Please note, low battery of the charging case might cause abnormal functionality such as auto on and auto off.
Bluetooth Pairing 1 2 3 4 Using your BE Free5 for the first time Pairing BE Free5 Right earpiece with source device 1. When pick up the Right earpiece from the charging case, press and hold the BE Free5’s Power/Function button for 2 seconds until the LED indicator light flashes orange and white or you hear voice prompt “Pairing mode activated”. Your BE Free5 is now in pairing mode. 2. Turn on Bluetooth® on your source device, then select “BE Free5” once it appears on the device list. 3.
Pairing additional devices with your BE Free5 To pair additional devices to your BE Free5 ensure that your BE Free5 is not connected to any device then repeat the steps 1,2,3 outlined above. Note: If your BE Free5 have already been paired with eight devices and a ninth device is paired, the stored information for the very first device will be deleted. Pairing BE Free5 Right earpiece with Left earpiece Turns on both earpieces and insert them in your ear, both earpieces will automatically connected.
Power On/Power Off There are two ways to turn on your BE Free5 1) Pick up the earpieces from the charging case, they will automatically power on. 2) When your BE Free5 are not in the charging case and are Off, press Power/Function button for about 2 seconds until the LED indicator flashes white and you hear the voice prompt “Power on” on both earpieces.
Wearing Your BE Free5 To ensure a secure and comfortable fit when wearing your BE Free5: 1. Select right size of ear tips and install tips on BE Free5*, rotate the SpinFit tips CP350 (if wearing this type). 2. Place the BE Free5 into each ear and rotate the earpiece to well fit so that they are positioned comfortably. 3. You can also add additional support by fitting the one of the three available wing sizes to the BE Free5. NOTE: 1. *There are 4 pairs of silicone ear tips provided.
Handling Phone Calls and Siri/Google Assistant When your BE Free5 are connected to a Bluetooth-enabled smartphone, you can handle your phone calls directly using MFB on right earpiece.
Listening to Music You can enjoy and control audio through Power/Function button on your BE Free5.
MISCELLANEOUS Restore Factory Settings When you restore the BE Free5 to its factory settings, the paired devices stored will be deleted. To restore factory settings: 1 Ensure that your BE Free5 are not connected to any device. 2 Put the BE Free5 in pairing mode. 3 Double click on the Power/Function button on the right earpiece until the LED indicator flashes in orange/white two times, and you hear short tones from the BE Free5.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to two different Part 15 rules sections of the FCC. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE EU Regulatory Conformance Hereby, Optoma Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Notice: Observe the national local regulations in the location where the device is to be used.
Specification Connection type Bluetooth type Bluetooth profile Bluetooth 2.4Ghz V4.2 HSP v1.2, HFP v1.6, A2DP v1.3, AVRCP v1.6 , Codec SBC, AAC Driver Type Dynamic Driver size 5.6mm, Graphene diaphragm Impedance 16 Ohm Battery life (estimated) Up to 4 hours (for the earpieces) Lithium-ion battery, Typical 3.
www.optoma.