User Manual Optoma NuForce BE Free8 Truly Wireless Premium Earphones Regulatory model name: APBEFREEB Version VA2.
Contents • WHAT’S IN THE BOX • BE Free8 EARPHONES • THE BASICS Charging your BE Free8 Battery Low Alarm and Battery Status Bluetooth pairing Power On/ Power Off Wearing your BE Free8 Handling phone calls and Siri/Google voice Listening to music • MISCELLANEOUS Restoring factory settings Voice prompts list Disclaimer FCC Interference statement CE Trademark attribution Specification 2
WHAT’S IN THE BOX BE Free8 earphones Silicon tips 2 types of silicon tips Total of 5 pairs ear tips Charging case Charging cable (Micro-USB) Basic user’s manual Safety Instruction 3
BE Free8 EARPHONES 2 1 4 3 1. Charge jack 2. Multifunction button 3. Microphone 4.
The BASICS Charging Your BE Free8 Although your BE Free8 earphones come with a partially charged battery, it is recommended that you fully charge your BE Free8 before first use. 1. Put your BE Free8 into the charging case. The charge cable should be connected to the charge port of charging case and either to a PC or a dedicated USB charger. 2. When charging, the LED indicator(s) on the charging case will flash every 0.5s. 3.
Battery Low Alarm and Battery Status When the battery level is very low, you will hear a “Battery Low” voice prompt from your BE Free8 every 2 minutes when the estimated battery reserve remaining time is under 15 minutes.
1. When pick up left earpiece from the charging case, press and hold the BE Free8’s Power/Function button for 4 seconds until the LED indicator light flashes orange and white. Your BE Free8 is now in pairing mode. 2. Turn on Bluetooth® on your source device, then select “BE Free8” once it appears on the device list. 3. Once successfully paired, the LED indicator will flash white and you hear “Primary device connected” from your BE Free8.
Power On/Power Off There are two ways to turn on your BE Free8 1) When charging case is activated *, pick up the Left earpiece from the charging case, it will automatically power on. Then pick up right earpiece and press MFB for 2 seconds to turn it on. 2) When your BE Free8 is not in the charging case and is in OFF state, press Power/Function button for about 2 seconds until the LED indicator flashes white and you hear the “Power on” on the left earpiece.
To turn the BE Free8 to OFF, either place each earpieces back into the charging case, or to push Power/Function button for about 4 seconds until the LED indicator turns orange and you hear the “Power off”. Wearing Your BE Free8 To ensure a secure and comfortable fit when wearing your BE Free8: 1. Select right size of ear tips and install tips on BE Free8.* 2. Rotate the SpinFit tips CP350 (if wearing this type) and place the BE Free8 into each ear so that they are positioned comfortably.
Handling Phone Calls and Siri/Google voice When your BE Free8 are connected to a Bluetooth-enabled smartphone, you can handle your phone calls directly using MFB on left earpiece.
MISCELLANEOUS Restore Factory Settings When you restore the BE Free8 to its factory settings, the paired devices stored will be deleted. To restore factory settings: 1 Ensure that your BE Free8 are not connected to any device. 2 Put the BE Free8 in pairing mode. 3 Double click on the Power/Function button on the left earpiece until the LED indicator flashes white six times following orange/white flashes alternately, and you hear short tones from the BE Free8.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to two different Part 15 rules sections of the FCC. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE EU Regulatory Conformance Hereby, Optoma Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Notice: Observe the national local regulations in the location where the device is to be used. Trademark Attribution Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies international, Ltd.
Specification Connection type Bluetooth type Bluetooth profile Codec Bluetooth 2.4Ghz V4.1 HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4 , aptX low latency, AAC SBC, aptX low latency, AAC Driver Type Dynamic Driver size 5.8mm, inner-metal coated diaphragm Impedance 32 Ohm Battery life (estimated) Up to 4 hours Lithium-ion battery, Typical 3.
www.optoma.