User Guide

nVent.com | 11
SECTION 2.6 TEMPERATURE CONTROL
The thermostat can be configured to control
the floor temperature, air/room temperature,
or a combination of floor and air/room
temperature.
SECTION 2: SETUP/PREFERENCES
TEMPERATURE CONTROL SETTING DESCRIPTION
Floor temp. (default) The thermostat controls the
floor temperature.
Air/Room temp. The thermostat controls the air/room
temperature. This setting disables the
floor sensor and is useful if the floor
sensor is damaged or not installed.
Combined (advanced) For advanced users only - This setting
allows control of the floor heating
system based on air/room temperature
but will not turn on the floor heating
system if the floor temperature is above
the floor limit.
Press Cancel to ignore the change or press Save to confirm.