User Guide

12 | nVent.com
SECTION 2: SETUP/PREFERENCES
SECTION 2.7 TEMPERATURE DISPLAY
The thermostat can display either of the
following temperatures on the home screen
and screensaver:
• Floor temp. (default)
• Air/Room temp.
Press Cancel to ignore the change or press
Save to confirm.
SECTION 2.8 FLOOR TYPE
Set according to your flooring type.
When Engineered/Laminate is selected, the
floor temperature will be limited to 82°F /
28°C.
NOTE: This setting is not available if
Temperature Control is set to Air/Room
temp. Refer to section 2.6 on page 11.
Press Cancel to ignore the change or press
Save to confirm.
Section 2.9 Early Start
Early Start calculatestheoptimaltimeto
start heating to ensure your floor reaches the
desired temperature at the scheduled time
in your program/schedule. It only applies if
your thermostat is following a programmed
schedule (ie. thermostat is in Auto mode).
Press Cancel to ignore the change
or press Save to confirm.