User Guide
14 | nVent.com
SECTION 3: PROGRAM/SCHEDULE
SECTION 3.1 PROGRAM/SCHEDULE
From the home screen, access the Program/Schedule menu by pressing
Settings>Program/Schedule.
Below is the default schedule of the Home thermostat:
WEEKDAY
PERIOD START TIME
FLOOR TEMPERATURE
TILE WOOD
Wake 6:00 am 88°F (31°C) 82 °F (28°C)
Leave 9:00am 74°F (23°C) 74 °F (23°C)
Return 5:00 pm 88°F (31°C) 82 °F (28°C)
Sleep 11:00 pm 74°F (23°C) 74 °F (23°C)
WEEKEND
PERIOD START TIME
FLOOR TEMPERATURE
TILE WOOD
Wake 8:00 am 88 °F (31°C) 82°F (28°C)
Sleep 11:00 pm 74 °F (23°C) 74 °F (23°C)
To adjust the setpoint(s):
1. Use the or arrowstotogglebetweenweekdaysandweekenddays.
2. Select the period that you want to adjust.
3. Using the or arrows, adjust the time and temperature of the setpoint.
4. Press Cancel to ignore the change or press Save to confirm.
To set a new program/schedule, Press New Program at the bottom of the screen:
1. Select the days that share the same schedule.
2. Press Next.
3. Select the period that you want to adjust.
4. Using the or arrows, adjust the time and temperature of the setpoint.
5. Press Cancel to ignore the change or press Save to confirm.
6. Press Next.
7. Repeat steps 1 to 6 until all days have been programmed.
8. Press Done to save the program/schedule.