User Guide

nVent.com | 5
The Home thermostat features a series of
diagnosticteststoconrmthethermostat
is installed and functioning properly.
The System Testsoptionisavailabletherst
time the thermostat is connected to power or
after a factory reset is initiated.
GFCI
The Home thermostat has a built-in GFCI (Ground Fault Circuit Interrupter).
The GFCI protects against risks of electrocution caused by a current leakage.
If the current leakage exceeds 5 mA, the GFCI will automatically be triggered,
thuscuttingpowertotheoorheatingsystem.Toindicatethefault,amessage
will appear on the screen informing you of the fault. To reset the GFCI, press the
button on the right side of the thermostat. If problem persists, contact nVent
NUHEATat1.800.778.WARM(9276).
SETUP WIZARD
The Home thermostat features a Setup Wizard to guide you through the basic setup
process.
The Setup Wizardisavailablethersttimethethermostatisconnectedtopoweror
after a factory reset is initiated. Refer to section 4 on page 15.
SYSTEM TESTS