Instructions / Assembly

INSTALLATION ON MASONRY:
Tools needed for assembly:
A. Drill
B.
3
/
16
" or
1
/
4
" masonry drill bit
C.
5
/
8
" masonry drill bit
D.
9
/
16
" socket or adjustable wrench
(See Detail #5) Caution - Installation must be on structural masonry. If mounting on
brick veneer, you must use longer lag bolts and secure into framing members. Ask your
local home center for proper fasteners and techniques. You can use either Option "A" or
"B" from above following the bracket positioning instructions. With the mounting brackets
as a guide, mark the hole locations on the masonry and drill a
3
/
16
" -
1
/
4
" hole about 2
1
/
4
""
deep using a masonry drill bit. Enlarge the hole using a
5
/
8
" masonry drill bit to the final size
necessary. Insert the lag shields supplied and secure mounting brackets using the
3
/
8
" x 2
1
/
2
"
lag bolts supplied.
DETAIL #4
DETAIL #5
p.6
Place one bracket on either side
of the arm support shoulder.