User manual

33
1. Separate the cameras and the Powerline
adapter for the first network from the
electric supply.
2. Set up the second network, comprising
one or several cameras and a Powerline
adapter with the standard encryption
(see “5.Starting the device“ on page25).
3. Press and hold the button
on the underside of the
Powerline adapter 17 for
between 1 and 3 seconds.
4. The Powerline adapter will now create a
new encryption.
5. Press the Network security button 5 for
all cameras on the second network within
120 seconds.
The cameras will assume the new key
from the Powerline adapter and will now
work together with it.
For safety reasons, the transfer time is
restricted to 120 seconds. If you are not
immediately successful at setting all
cameras to the new key within this time,
start again at point 3.
6. Connect the Powerline adapter and
cameras on the first network to the
electric supply once again.
As both networks are now working with
different encryptions, they can be operated
independently of each other.
8.3 Resetting the encryption
To reset the encryption for the second
network to the standard encryption,
proceed as follows:
1. Press and hold the button
on the underside of the
Powerline adapter 17 for at
least 15 seconds.
The encryption for the
Powerline adapter will then
be reset to the standard
encryption.
2. Press and hold the Network security
button 5 on the cameras for at least
15 seconds.
The encryption for the camera will then
be reset to the standard encryption.
9. Connecting an external loudspeaker
In order to be able to speak with your child
via your smartphone, an external
loudspeaker needs to be connected to the
video camera. PC loudspeakers are
particularly suitable here.
Note: Under certain circumstances, your
words may be transmitted at a delay due to
the fluctuating WLAN or mobile data
transmission rates.
The loudspeaker is connected to the
socket 3 with a 3.5 mm phone jack.
Technical data:
• Impedance: 8 Ohm or active loudspeaker
• Connection: 3.5 mm stereo phone jack