User's Manual

▪ Remove the battery from the receiver collar and the remote control if you are not using the appliance for
3 months or more. The collar will memorize the configuration chosen (coding).
▪ It is necessary to replace the batteries every two years, even if the unit has not been used for long periods.
▪ Never leave a discharged battery in the unit: leakage could damage your CANICOM 200 First.
▪ Keep your CANICOM 200 First unit out of reach of children. It is not a toy for you or your children.
● Maintenance
▪ Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth and neutral
detergent.
▪ In order to maintain water tightness, we recommend the replacement of the seal located in the receiver collar
every year.
● Troubleshooting
Should your CANICOM 200 First stop working or develop a fault, first read this guide over, then check the batteries
and that you are using the product correctly.
If you encounter any problem, re-code the receiver collar (ref. re-coding procedure).
Reset: connect the 2 supports of the battery
Diagram 6
Re-initialize the system by removing the battery from its
housing, then with a metallic tool (e.g. screwdriver, scissors)
touch each of the 2 battery contacts for 2 seconds
approximately (ref. Diagram 6).
Insert the battery again: one beep is emitted indicating the
battery is in correct position.
Restart your CANICOM collar using the remote control.
If the problem persists, contact your distributor. According to the extent of the malfunction, you may have to return
your product for check and repair. For all repairs please supply the following:
− the complete product
− the proof of purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs incurred.
● Technical specifications
Remote control Receiver collar
Power 3 Volt CR 2430 lithium 3 Volt CR 2 lithium
Battery life Continuous use:
Approximately 50 000 triggers
In stand-by: Approximately 7 months
Continuous use : Approximately 2 months
Frequency (power) 915 MHz (0.75 mW) 915 MHz
Antenna Integrated Integrated
Range Approximately 200 yards
Tightness Showerproof Waterproof
Radio operator safety and coding By micro-controller By micro-controller
Indicator of wear of the batteries Indicator light Indicator light
Levels of stimulation 5
Use temperature Between – 5°F et +104°F Between – 5°F et +104°F
Dimensions 3.7” x 1.5” x 0.7” 2.6” x 1.5” x 1.6”
Weight (with the battery) 1.4 oz 2.6 oz (without strap)
Collar adjustable to neck sizes from 8” to 21.5”
● Receiver collar battery life
− 7 months in stand-by: for a use of 4 hours a day
− 2 months in continuous use: about 10 000 stimulations of 2 seconds at level 5
To increase the battery life of the receiver collar, we recommend you to deactivate the unit if you are not using it for
a long period.
User’s guide CANICOM 200 FIRST – indice A 7/8