User's Guide

- 5 -
- If you need less than 1000 ft of antenna wire: select “small ground”, by pushing the selector button to the left. The following
pictogram appears on the LCD screen:
- If you need more than 1000 ft meters of antenna wire: select « large ground », by pushing the selector button to the right. The
following pictogram appears on the LCD screen:
WARNING: The choice of the selector’s position is not determined by the wire length only; it also depends on the ground configuration.
Example: if you need more than 1000 ft of antenna wire but the width of your yard is small, you will have to select “small ground”.
The width of the warning zone is adjustable by using the and buttons located on the front of the transmitter (40 levels).
The static correction zone is adjustable by using the button located on the front of the transmitter (8 levels).
Graduations on the LCD screen indicate the levels selected.
IMPORTANT: Detection distances vary depending on the length of antenna wire laid out on the property. The longer the antenna wire,
the narrower the zones.
The width of the warning and static correction zones also varies according to the small/large ground selector position.
NOTE: the static correction zone cannot be wider than the warning zone.
The following tables indicate the approximate width of the zones for a 2600 ft and a 1000 ft installation, with the selector in position “large
ground”:
2600 ft installation, selector position « large ground »
LCD screen
Zones settings
(levels)
Approximate width of the zones
on each side of the wire
MINIMUM warning = 1
MAXIMUM warning = 40
MINIMUM warning ~ 0 m
MAXIMUM warning ~ 13.5 ft
MINIMUM static correction = 0
No static correction area.
Only beep sounds are emitted.
MINIMUM warning = 15
MAXIMUM warning = 40
MINIMUM warning ~ 6 ft
MAXIMUM warning ~ 13.5 ft
MAXIMUM static correction = 8
MAXIMUM static correction ~ 6 ft
1000 ft installation, selector position « large ground »
LCD screen
Zones settings
(levels)
Approximate width of the zones
on each side of the wire
MINIMUM warning = 1
MAXIMUM warning = 9
MINIMUM warning ~ 11.5 ft
MAXIMUM warning ~ 52.5 ft
(Beyond, authorized area saturated. Beep sounds are emitted
permanently)
MINIMUM static correction = 0
No static correction area.
Only beep sounds are emitted.
MINIMUM warning = 8
MAXIMUM warning = 9
MINIMUM warning ~ 42 ft
MAXIMUM warning ~ 52.5 ft
MAXIMUM static correction = 5
(Beyond, authorized area saturated. Beep sounds and static
correction s are emitted permanently)
MAXIMUM static correction ~ 37.4 ft
IMPORTANT: the widths indicated are approximate and vary depending on the configuration of each installation.
The following tables indicate the approximate width of the zones for a 1000 ft and a 330 ft installation, with the selector in position “small
ground”: