PROFESSIONAL DJ MIXER Quick Start Owner’s Manual BOX CONTENTS • MIXER • POWER SUPPLY Manual de inicio rápido para el usuario (ESPAÑOL) CONTENIDOS DE LA CAJA • MEZCLADOR • FUENTE DE ALIMENTACIÓN Schnellbedienungsanleitung (DEUTSCH) SCHACHTELINHALT • MISCHPULT • STROMKABEL Manuel d’utilisation du propriétaire (FRANÇAIS) CONTENU DE LA BOÎTE • MIXER • BLOC D’ALIMENTATION Manuale rapido di utilizzazione (ITALIANO) CONTENUTO DELLA CONFEZIONE • MIXER • CAVI DI ALIMENTAZIONE
CD PLAYER CD PLAYER CD PLAYER HOUSE AMP CD BURNER TO LINE TO LINE TO LINE TAPE DECK OR DJ MIC TO PHONO 2 TO PHONO 1 FROM RECORD TO AMP OR TO MIC TO LINE TO LINE MIXER QUICK SETUP GUIDE (ENGLISH) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Make sure all items listed on the front of this guide are included in the box. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT Study this setup diagram. Place mixer in an appropriate position for operation.
FRONT PANEL FEATURES 17. Crossfader Direction Button: Activation of this switch reverses the assignment of CH-1 and CH-2 on the crossfader. 18. Crossfader Slope Control: The position of this knob determines how quickly or intensely the crossfader will blend. 19. Master Output Knob: Adjusts the main output volume. 20. Master Meter: Shows audio level of the master output. 21. KILL Switches: Eliminate High, Mid, or Low frequencies for a unique effect. 22.
DXM06 Effects section FX Assign: Move the toggle to select the channel you would like to process. FX ON: Activates and deactivates the effects FX Select: The effects can be applied to MIC/AUX, CH1, CH2, or MASTER. When FX Assign is set to MIC/AUX, you can select from the 6 FX written in small text along the bottom row (Vocoder, Tape echo, Echo, Reverb 1, Reverb 2, LMT+DSTR).
Channel FX: 2XCOPY*: A copy of the signal is delayed by a defined time. The WET/DRY fader will act like a sharp contour crossfader, fading between the original (MIX/INTENSITY fader down) and the delayed (MIX/INTENSITY fader up). Pro DJs will often keep 2 copies of a record so they can do beat juggling tricks like this. Try using this effect with the beat tap sync and move the MIX/INTENSITY fader up and down to the tempo. Now try it with different multiples of the tempo using the RATE knob.
REPRODUCTOR DE CD REPRODUCTOR DE CD REPRODUCTOR DE CD AMP LOCAL GRABADORA DE CD HACIA LINEA HACIA LINEA HACIA LINEA CINTA DE CASSETTE O MICRO DE DJ HACIA PHONO HACIA PHONO DESDE LA GRABADORA A AMPERIOS HACIA MICRO HACIA LINEA HACIA LINEA MANUAL DE INICIO RÁPIDO PARA EL MEZCLADOR (ESPAÑOL) 1. Asegúrese de que todos los artículos incluidos al inicio de este manual están incluidos en la caja. 2. LEA LAS INSTRUCCIONES DEL FOLLETO DE SEGURIDAD ANTES DE UTILIZAR EL PRODUCTO. 3.
CARACTERÍSTICAS DEL PANEL FRONTAL 19 3 22 25 23 4 2 26 27 15 11 24 13 1 5 8 7 9 5 6 8 17 10 21 7 6 18 9 10 20 20 18. Control de pendiente para el crossfader: La posición de este control determina lo rápido o intenso que se mezclará el crossfader. 19. Botón de salida Master: Ajusta el volumen de la salida principal. 20. Medidor de Master: Muestra el nivel de audio de la salida de Master. 21. Conmutadores KILL: Eliminan las frecuencias altas, medias o bajas para dar un efecto único.
Sección de efectos del DXM06 Asignación FX: Mueva el conmutador para seleccionar el canal que le gustaría procesar. FX ON [Encendido]: Activa y desactiva los efectos. Selector FX: Los efectos pueden aplicarse al MIC/AUX, CAN1, CAN2 o MASTER. Cuando la asignación FX esté ajustada para MIC/AUX, usted podrá seleccionar entre los 6 FX escritos en letra pequeña a lo largo de la fila inferior (Vocoder, Tape echo, Echo, Reverb1, Reverb 2, LMT+DSTR).
Canal FX: 2XCOPY*: Una copia de la señal está retardada por un tiempo definido. El fader de SONIDO ORIGINAL/SONIDO DE EFECTO (WET/DRY) actuará como un crossfader de contorno agudo, fundiéndose entre el original (fader de MEZCLA/INTENSIDAD abajo) y el retardado (fader de MEZCLA/INTENSIDAD arriba). Los DJ profesionales normalmente conservarán 2 copias de un disco para así poder realizar juegos malabares como estos con el beat.
CD SPIELER CD SPIELER CD SPIELER HAUPTVERSTÄRKER 'CD BRENNER ZU LINEAR ZU LINEAR ZU LINEAR KASSETTENDECK ODER DJ MIC ZU PHONO ZU PHONO VON AUFNAHME 'ZUM VERSTÄRKER ODER ZUM MIC ZU LINEAR ZU LINEAR MISCHPULT SCHNELLAUFBAUANLEITUNG (DEUTSCH) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Mehr Versichern Sie sich, daß alle im Anfang dieser Anleitung aufgeführten Teile in der Schachtel enthalten sind. LESEN SIE DIE SICHERHEITSBROSCHÜRE BEVOR SIE DAS GERÄT BENUTZEN.
BEDIENUNGSELEMENTE VORDERSEITE 19 3 22 25 23 4 2 26 27 15 11 24 13 1 5 8 7 9 5 6 8 17 10 21 7 6 18 9 10 20 20 21 19. Master-Wiedergaberegler: Stellt die Hauptausgabelautstärke ein. 20. Master-Messer: Zeigt den Tonpegel der MasterWiedergabe an. 21. KILL-Schalter: Um hohe, mittlere oder tiefe Frequenzen zur Erzielung eines einmaligen Effekts zu unterbinden. 22. Effektzuordnung: Wählt den Kanal, welcher bearbeitet werden soll. 23. Effektbearbeitung: Aktiviert den Prozessor. 24.
DXM06 Abschnitt Effekte FX-Zuordnung: Kippschalter betätigen um den Kanal, welcher verarbeitet werden soll, auszuwählen. FX-EIN: Aktiviert und De-Aktiviert die Effekte. FX-Auswahl: Die Effekte können auf die Kanäle MIC/AUX, K1, K2, oder MASTER appliziert werden. Falls FXZuordnung auf MIC/AUX eingestellt ist, können Sie von den mit kleiner Schrift beschrifteten 6 FX entlang der Unterreihe (Vocoder, Tape Echo, Echo, Widerhall 1, Widerhall 2, LMT+DSTR) auswählen.
Kanal-FX: 2XCOPY*: Eine Kopie des Signals wird um eine bestimmte Zeit verzögert. Der WET/DRY-Fader fungiert wie ein Sharp-Contour-Crossfader, und blendet zwischen dem Original (MISCHUNG/INTENSITÄT-Fader unten) und der Verzögerung (MISCHUNG/INTENSITÄTFader oben). Professionelle DJs werden oftmals 2 Kopien einer Platte benutzen um Tricks solcher Art mit dem Rythmus vorzunehmen.
LECTEUR CD LECTEUR CD LECTEUR CD AMP LOCAUX GRAVEUR DE CD VERS LIGNE VERS LIGNE OU VERS LIGNE CONSOLE D'ENREGISTREMENT MIC DJ VERS PHONO VERS PHONO DE L'ENREGISTREUR VERS AMPÈRES OU VERS MIC VERS LIGNE VERS LIGNE GUIDE D’INSTALLATION RAPIDE DU MIXER (FRANÇAIS) 1. Vous assurer que tous les articles énumérés au début de ce guide sont inclus dans la boîte. 2. LIRE LE LIVRET D’INSTRUCTION DE SÉCURITÉ AVANT DE FAIRE USAGE DU PRODUIT 3. Étudier le diagramme de montage. 4.
CARACTÉRISTIQUES DU PANNEAU AVANT 14 18. Commande de pente du crossfader : La position de ce bouton déterminera à quelle vitesse ou intensité le crossfader fera le mélange. 19. Sortie Principale (RCA) : Ce contrôle rotatif ajuste la sortie du volume principal. 20. Compteur principal : Indique le niveau audio de la sortie principale. 21. Interrupteurs coupe-circuits : Éliminent les fréquences hautes, moyennes et les basses pour un effet unique. 22. Assignation des effets : Sélectionne la voie à utiliser.
Section effets pour la console DXM06 FX Assign : Appuyez sur la touche pour sélectionner le canal que vous désirez traiter. FX ON : Active et désactive les effets. FX Select : Les effets peuvent être aplliqués aux entrées MIC/AUX, CH1, CH2 ou au MASTER. Lorsque FX Asign est affecté à l’entrée MIC/AUX, vous pouvez choisir parmi les six effets écrits en petit sur la rangée inférieure (Vocoder, Tape echo, Echo, Reverb 1, Reverb 2, LMT+DSTR).
Channel FX (effet des voies) : 2XCOPY*: Une copie du signal est retardée selon une durée définie. L’atténuateur du signal traité/non traité (WET/DRY) agit comme un fondu enchaîné marqué, permettant une transition entre le signal original (l’atténuateur MIX/INTENSITY sur pente ascendante) et celui retardé (l’atténuateur MIX/INTENSITY sur pente descendante). Les DJ professionnels se font souvent une copie d’un disque pour faire des effets de rythme de ce type.
LETTORE CD LETTORE CD LETTORE CD AMP FISSO MASTERIZZATORE A INGRESSI LINEA A INGRESSI LINEA A INGRESSI LINEA PIASTRA DI REGISTRAZIONE O MICROFONO DEL DJ A PHONO A PHONO DA REGISTRAZIONE AD AMPLIFICATORE A MIC A INGRESSI LINEA A INGRESSI LINEA MANUALE RAPIDO DI MONTAGGIO DEL MIXER (ITALIANO) 1. Verificate che tutti gli elementi elencati sul frontespizio di questo manuale siano inclusi nella confezione. 2. PRIMA DI UTILIZZARE IL PRODOTTO LEGGETE IL LIBRETTO DELLE ISTRUZIONI DI SICUREZZA 3.
CONFIGURAZIONE PANNELLO ANTERIORE 19 3 22 25 23 4 2 26 27 15 11 24 13 1 5 8 7 9 5 6 8 17 10 21 7 6 18 9 10 20 20 21 19. Manopola Uscita Master: Regola il volume dell’uscita principale. 20. Misuratore Master: Mostra il livello audio dell’uscita master. 21. Interruttori KILL: Elimina le frequenze Alte, Medie, o Basse per ottenere un effetto eccezionale. 22. Assgnazione Effetti: Seleziona il canale da processare. 23. Processo Effetti: attiva il processore. 24.
Sezione effetti DXM06 FX Assign: Muovete questo commutatore per selezionare il canale che vorreste elaborare. FX ON: Attiva e disattiva gli effetti FX Select: Gli effetti possono essere applicati a MIC/AUX, CH1, CH2, o MASTER. Quando FX Assign è impostato su MIC/AUX, potete selezionare uno dei 6 FX scritti in piccolo a livello dell’ultima riga (Vocoder, Tape echo, Echo, Reverb 1, Reverb 2, LMT+DSTR).
Canale FX: 2XCOPY*: Una copia del segnale è rimandata (delay) per un periodo definito. Il fader WET/DRY agirà come un preciso taglio del crossfader, sfumando dall’originale (fader MIX/INTENSITY in basso) al delay (fader MIX/INTENSITY in alto). I DJ professionisti spesso terranno 2 copie di un disco in modo da poter mettere in pratica trucchetti di beat juggling come questi. Provate a usare questo effetto con il beat tap sync e muovete il fader MIX/INTENSITY su e giù a tempo.