Professional Disc Jockey Products EM360 PROFESSIONAL DJ EFFECTS MIXER With KAOSS* Pad Multi-effects Processor Owner’s Manual *KAOSS technology under license from KORG ©2000 Industries http://www.numark.
EM 360 Safety Information h) Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. i) Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.
EM360 EM360 PROFESSIONAL DJ EFFECTS MIXER With KAOSS PAD Multi-effects Processor CONGRATULATIONS! You have purchased the EM360 Stereo Effects Mixer by . It is the first DJ mixer with a completely interactive, real-time effects processor. This one of a kind DJ product boasts all of the qualities that you have come to expect from a mixer plus, it features a built in KAOSS PAD*. This piece of equipment literally puts effects processing at the DJ’s fingertips.
EM360 MIXER FEATURES 27 6 17 22 15 5 26 14 1 2 23 13 25 4 1 28 24 12 21 3 7 20 19 18 16 10 8 9 11 INPUTS 1. 10. Split/Blend Cue – controls how PFL and Program audio are sent to your headphones. In split mode, the PFL audio can be heard in your left ear and PGM audio can be heard in your right ear. In blend mode, both PFL and PGM can be heard in both ears. Input faders - control individual source levels in the mix. Note: Never use spray cleaners on the slide controls.
EM360 19. Crossfader Assign Knob - determines which input channel will be heard when the crossfader is moved towards the knob. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other. CROSSFADER 18. Replaceable Crossfader - achieves clean segues between the two input channels selected by the Crossfader Assign. Note: The crossfader is a user replaceable item and subject to wear.
EM360 REAR PANEL FEATURES 4 11 5 12 2. 3. 4. 5. 6. 4 2 1 1. 4 10 9 8 7 6 3 6 3 6 3 7. MIDI Output – Attach Midi output to external processors to be controlled by the KAOSS Pad. See page 9 for details on signal output. 8. Record Outputs – Unbalanced output used to send the output of the program to any connected recording device. 9. Zone/Booth Output - Unbalanced output controlled by Zone Level control on the face panel for extra speakers, lighting, or recording your mix. 10.
EM360 QUICK SETUP DIAGRAM VERY IMPORTANT: Please read this entire manual before connecting this unit to your system For optimum performance: • • • • Always make sure that AC power is OFF while making any connections. Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittence that could easily damage your speakers.
EM360 KAOSS PROGRAM EFFECTS Effect program control parameter list NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 EFFECT X (horizontal position) LOW PASS FILTER FREQ LOW PASS FILTER FREQ WAH FILTER FREQ DIST+VOICE FILTER FREQ DIST+L.P FILTER FREQ DIST+L.
EM360 MIDI FUNCTIONS With the factory settings, each operation will transmit the following MIDI messages.
EM360 SPECIFICATIONS INPUTS: Line: Mic: Phono: 10Kohm input impedance 110mV rms sensitivity (for 1.22V output) 10Kohm input impedance unbalanced 1.6 mV rms sensitivity (for 1.22V output) 500mV rms max input 47Kohm input impedance 1.8mV rms sensitivity @ 1 KHz (for 1.22V output) OUTPUTS: Line: 9V rms max Headphone Amp: 1V rms watt into 16ohm Distortion: less than 0.01% SIGNAL TO NOISE RATIOS* (vs.
PRO SM-3 BLOCK DIAGRAM - The Leader in DJ Technology ©2000 Industries - 11 - http://www.numark.
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1.
