Professional Disc Jockey Products PA5Pro Preamplifier OWNER’S MANUAL NUMARK INDUSTRIES 111 Dupont Drive, Providence, RI 02907 http://www.numark.
PA5Pro 6. Heat - Avoid placing this product too close to any high heat sources such as radiators. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
PA5Pro NUMARK PA5Pro Preamplifier INDEX Safety Information Product Registration Page 2 Introduction Features Page 4 Precautions Page 5 Front Panel Diagram and Features Page 6 Rear Panel Diagram and Features Page 7 Connection Diagram Page 9 Specifications Page 10 Block Diagram Page 11 Warranty and Service Page 12 Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 3 http://www.numark.
PA5Pro CONGRATULATIONS! You have purchased the PA5Pro Preamplifier by Numark. The Numark PA5-Pro is a high-quality stereo preamplification unit. Perfect for a variety of applications such as aerobics clubs, karaoke, restaurants, office music, bars, churches, or even nightclub off peak time. This simple to operate unit allows you to select from 4 different input sources such as a CD player or a tape deck and still page someone with the 2 microphones using our integrated auto-muting feature.
PA5Pro IMPORTANT INFORMATION... Please read this entire manual before connecting the PA5PRO to your system. For optimum performance: • Always make sure that AC power is OFF while making any connections. • Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. • Never use spray cleaners on the slide controls.
PA5Pro PA5PRO FRONT PANEL DIAGRAM AND FEATURES... 1 2 3 4 5 6 7 8 9 10 If the P A 5 P R O is your first preamplifier, please read this entire manual before you begin operation. The P A 5 P R O can be rack-mounted or used as a free-standing unit (1-19" rack unit space). 1. Power Switch and Power-On LED. MIC SECTION The P A 5 P R O has 2 extremely controllable DJ Mic channels. The mute switch on the rear panel (2) automatically reduces the level of the music when the DJ Mic is spoken into. 2.
PA5Pro PA5PRO REAR PANEL DIAGRAM AND FEATURES... 1 2 3 4 5 6 7 8 9 1. GND is the grounding lug for turntables 1, 2 and 3 (phono inputs on Channels 1, 2 and 3). Always use this connection (your turntable cable should have a grounding wire). 2. The Automute Switch should be set to the on position if you want inputs 3-6 to lower volume automatically when the microphones are spoken through. Set it to the off position if you don’t want the inputs affected. 3. Phono Inputs use unbalanced RCA jacks.
PA5Pro Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 8 http://www.numark.
PA5Pro PA5Pro CONNECTION DIAGRAM... INSTALLATION AND OPERATION Study the Connections Diagram. First, connect all stereo input sources. Next connect your microphone(s) and monitor headphones. Make sure all volumes are at "zero" and the unit is off. Finally, connect the stereo outputs to the power amplifier(s) and/or audio sources. Plug the P A 5 P r o into AC power. Now you are ready to switch it on.
PA5Pro SPECIFICATIONS... INPUTS: Line: 150 mV rms sensitivity Mic: 2.5 mV rms sensitivity Phono: 2.5 mV rms sensitivity OUTPUTS: Line: 2V rms EQUALIZER: Bass/Mid/Treble control +-8dB SIGNAL TO NOISE RATIOS (vs. maximum output): Line: Mic: Phono: Better than 95 dB Better than 75 dB Better than 75 dB DISTORTION: T.H.D. 0.05% CROSSTALK: Channel Function 60dB 60dB FREQUENCY RESPONSE: Mic: Line: Phono: 20Hz-20kHz + _ .3dB 20Hz-20kHz + _ .5dB 20Hz-20kHz + _ 1dB WEIGHT: (net) 3.
PA5Pro BLOCK DIAGRAM... Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 11 http://www.numark.
Professional Disc Jockey Products Warranty and Service Information Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product manufactured and/or supplied by it to be free from defects in material or workmanship under conditions of normal use and service for 360 days, beginning on the date of purchase from an authorized Numark Dealer, but not to exceed 2 years from date of shipment by Numark.