USER’S MANUAL ©2002 Industries http://www.numark.
PPD01 SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference. c) Heed Warnings - All warnings on this product and in these operating instructions should be followed. d) Follow Instructions - All operating and other instructions should be followed. e) Placement – place the unit in a clean dry location.
PPD01 VERY IMPORTANT – MIXER CARE Please read this entire manual before connecting this unit to your system For optimum performance: • • • • • • • • • • All the slide faders are user replaceable items and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years.
PPD01 ® CONGRATULATIONS... You have just purchased a digital mixer designed specifically for the professional DJ. This unit has been designed with the latest digital technology to offer premium performance and effects. Several innovative features are included to ensure maximum results from your performance. Once again, congratulations and thank you for making the PPD01 your choice in professional DJ Mixers. Features: • World’s only 24-bit Digital 2 Channel Mixer with a S/N ratio of >102dB*, 0.
PPD01 TABLE OF CONTENTS Safety Instructions 2 Mixer Care and Included Items 3 Introduction and Registration 4 Specifications 5 Description of the Features Face Panel Rear Panel 6 9 Set-up & Connections 10 Crossfader Features 11 Warranty 12 SPECIFICATIONS TECHNICAL INPUTS: Line: Microphone: Phono: 100kΩ input impedance Max Input = 4V 5kΩ input impedance unbalanced 80mV rms max input 47kΩ input impedance OUTPUTS: Balanced Line: 11V rms max Unbalanced Line: 5.5V rms max Headphone: 0.
PPD01 FRONT PANEL FEATURES ©2002 Numark Industries - The Leader in DJ Technology -6- http://www.numark.
PPD01 Microphone - Auxiliary Input Controls 1. “MIC – AUX GAIN” (Microphone - Auxiliary Gain): This knob adjusts the volume of both the main microphone and auxiliary inputs. The gain should be turned completely to off when connecting and disconnecting equipment. If both inputs are used simultaneously the inputs will be mixed together. 2. “Treble” (Microphone - Auxiliary High EQ): This knob adjusts the high-tone input sound of the microphone. 3.
PPD01 Cueing / Monitor Controls 12. “Program/PFL Level Meter and Button”: Press to alternate display modes. a) When PROGRAM is indicated, this meter displays the stereo output levels of your mixed signal. b) When CH1 CH2 is indicated the meter shows the peak, “PFL”, Pre Fader levels of channels 1 and 2. You can use the channel “Gain” and “EQ” controls to match the levels of input signals while cueing 13.
PPD01 REAR PANEL FEATURES Note: It is recommended that the mixer be turned off before connecting and disconnecting any sources to the inputs of the mixer. 1. “AUX-SESSION INPUT” (Auxiliary Input): The line level input is used to connect the output from an external mixers or additional CD players and other line level devices such as samplers, tape decks, keyboards, and line output turntables. This input is mixed with any connected microphone. 2.
PPD01 QUICK SETUP DIAGRAM 1. 2. 3. 4. 5. Study this setup diagram. Make sure all faders are at “zero” and all devices are off. Connect all stereo input sources, your microphone, and monitor headphones Connect the stereo outputs to the power amplifier(s) and/or audio sources. Plug your mixer and other devices into AC power. ©2002 Numark Industries 6. Switch everything on in the following order. • audio input sources (i.e. turntables or CD players) • your mixer • last, any amplifiers 7.
PPD01 CROSSFADER MODES This section describes the actions of your digital crossfader, depending upon mode settings. Normal Fade: The contour knob controls the slope of crossfader. As a slope control, when the contour is rotated to the left, the Crossfader will gradually fade from one channel to the other. When rotated to the right, a very sharp fade between channels will occur immediately when the fader is moved.
® Professional Disc Jockey Products LIMITED PRODUCT WARRANTY 1. 2. 3. 4. 5. 6.
