Professional Disc Jockey Products RM6 Professional Single Space Rack Mixer Owner’s Manual ©2000 Industries http://www.numark.
RM6 i) Safety Information j) k) l) m) n) o) SAFETY INSTRUCTIONS a) b) c) d) e) f) g) h) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed.
RM6 VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • • • • • • • • • The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years.
RM6 RM6 Professional Single Space Rack Mixer Congratulations! You have purchased the RM6 Stereo Mixer by . This mixer’s unique features and design will provide maximum versatility to meet professional and industrial demands. The RM6 features six line inputs, balanced mic inputs, and dual zone outputs. By using the highest quality components, along with intelligent and durable features, the new RM6 one rack space mixer will become the unquestionable choice for installation worldwide.
RM6 Front Panel Features 6 1 4 3 7 2 5 11 8 9 10 13 INPUTS 1. 12 OUTPUTS Input gain knobs - control individual source levels in the mix. Note to contractors: After setting final input level, remove the knob to avoid tampering. 7. Zone Fader – controls the overall output level. 8. Mono/Stereo – sets this mode for the output audio. 2. On/Off switches – allow sound to be brought into the unit on each channel. 9. 3. Zone Assign – determines which zone the audio is directed to.
RM6 Quick Setup Diagram Study this setup diagram. There are many options available for your particular needs and this is just one possibility. Make sure all faders are at "zero" and all devices are off. First, connect all input sources. Next, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on.
RM6 Block Diagram - The Leader in DJ Technology ©1999 Industries -7- http://www.numark.
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years.
