Professional Disc Jockey Products TT1910 Direct-Drive Turntable OWNER’S MANUAL NUMARK INDUSTRIES 11 Helmsman Road, North Kingstown, RI 02852 http://www.numark.
TT1910 5. Water and Moisture - This product should be kept away from direct contact with liquids. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 6. H e a t - Avoid placing this product too close to any high heat sources such as radiators. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
TT1910 CONGRATULATIONS! You have just purchased the Numark TT1910 Professional Direct Drive Turntable. This unit has been design to provide years of reliable operation in an easy to use design. Thank you for purchasing a Numark Product and enjoy the mix......
TT1910 TT1910 DIAGRAM... PARTS DESCRIPTION (1) 45-rpm Adaptor (11) Pitch Control Slider (2) Anti-static slip mat (12) Tonearm (3) Center Spindle (13) Arm Rest (4) Stroboscope (14) Cueing Lever (5) Start/Stop Button (15) Anti-skating Knob (6) Speed Select Button (16) Counterweight (7) Strobe Dots (17) 12V BNC Light Connector (8) Target light (18) Hinge For Dust Cover (9) Power Button (10) Headshell Numark - The Proven Leader in DJ Technology ©1997 Numark Industries 4 http://www.numark.
TT1910 ASSEMBLY 1. Remove the main unit with the packing from the box and take off the packing material. DO NOT DISCARD ANY PACKING MATERIAL. The headshell, counterweight, and other parts are contained within the packing material. 2. Set the 45-rpm adaptor on the main unit. 3. Set the voltage selector switch to the 110-127 or 220-240V position according to the voltage of power supply. (This unit has been preset for 110-127V AC). 4. Insert the turntable platter onto the center spindle. CENTER SPINDLE 6.
TT1910 9. Slide counterweight onto the rear of the tonearm. Twist it lightly and it will screw onto the rear shaft of the tonearm. Counterweight Tonearm 10. Adjustment of horizontal zero (O) balance with stylus pressure and anti-skating : (1) Remove the stylus protector, do not touch the stylus tip during the adjustment. (2) Set the cueing lever to the lower position so it does not effect tone arm height. (3) Release the arm clamp and lift the tonearm from the arm rest so it moves freely.
TT1910 OPERATING INSTRUCTIONS 1. Push the power button to turn on the power, the speed indicator and the strobe-illuminator will light up. 2. Place a record on the turntable mat, when playing a 45rpm record with a large center hole, place the 45-rpm adaptor on the center spindle. 3. Set the rotation speed (33/45) to match the record. 4. Remove the stylus protector, release the arm clamp. 5. Set the cueing lever to the up position. 6. Press the Start/Stop button, the turntable platter will start to rotate.
Professional Disc Jockey Products Warranty and Service Information Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”) warrants each new product manufactured and/or supplied by it to be free from defects in material or workmanship under conditions of normal use and service for 360 days, beginning on the date of purchase from an authorized Numark Dealer, but not to exceed 2 years from date of shipment by Numark.