Professional Disc Jockey Products CM1000 CM1000R PROFESSIONAL CLUB MIXER Owner’s Manual
CM1000/CM1000R ©2000 Industries http://www.numark.com - The Leader in DJ Technology ©2000 Industries -2- http://www.numark.
CM1000 i) Safety Information j) k) l) m) n) o) SAFETY INSTRUCTIONS a) b) c) d) e) f) g) h) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed.
CM1000/CM1000R VERY IMPORTANT Please read this entire manual before connecting this unit to your system For optimum performance: • The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. • Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years.
CM1000/CM1000R CM1000/CM1000R PROFESSIONAL CLUB MIXER CONGRATULATIONS! ’s CM1000. This mixer is You have just purchased the most versatile professional club mixer available today, designed to accommodate both the professional installation market and club DJs alike. Its unique and comprehensive set of features makes it a desired choice for professional audio needs. The CM1000 is manufactured utilizing the highest quality audio components and advanced audio circuitry.
CM1000/CM1000R TABLE OF CONTENTS Safety Measures 2 Important Information 3 Registration 3 Introduction 4 Description of the Features 6 Quick Setup Diagram 9 Block Diagram 10 Specifications 11 Warranty 12 - The Leader in DJ Technology ©2000 Industries -7- http://www.numark.
CM1000/CM1000R FRONT PANEL FEATURES 4 20 2 8 7 14 3 1 24 26 25 5 22 23 21 6 9 19 17 1. 2. 3. 4. 5. 6. 7. 8. 15 1 18 11 10 12 13 16 INPUTS Input faders - control individual source levels in the mix. Pre-fader Gain Controls – adjust the pre-fader volume for cleaner sound. PFL Meter - used to adjust the PFL levels, accurately match channel levels with the Pre-fader gain controls before mixing them together. The idea is to properly match PFL inputs.
CM1000/CM1000R CROSSFADER 16. Replaceable Crossfader - achieves clean segues between the two input channels selected by the Crossfader Assign. 20. 21. 22. In this example "Hard left" selects Channel 1 and "Hard right" selects Channel 4. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other. Note: The crossfader is replaceable in case of failure.
CM1000/CM1000R REAR PANEL FEATURES 26 25 24 17 15 10 9 8 7 19 3 2 1 18 20 16 6 5 18 17 20 22 4 21 23 4 14 11 12 13 12. Auto mute level – to set the level of audio reduction with the auto-talk over is activated on the front panel. 13. Auto mute sensitivity- determines the mic loudness at which auto muting is activated. 14. Mic 2 input – for ¼” mic cables. 15. EQ sensitivity – for determining how much the front panel EQ can adjust the sound.
CM1000/CM1000R QUICK SETUP DIAGRAM Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on.
CM1000/CM1000R BLOCK DIAGRAM - The Leader in DJ Technology ©2000 Industries - 12 - http://www.numark.
CM1000/CM1000R SPECIFICATIONS INPUTS: Line: 10kohm input impedance 175mV rms sensitivity (for 1.22V output) Mic: 10kohm input impedance unbalanced 3mV rms sensitivity (for 1.22V output) 85mV rms max input Phantom power: +15V Phono: 47kohm input impedance 1.4mV rms sensitivity @ 1 KHz (for 1.22V output) OUTPUTS: Line: Headphone Amp: Distortion: 9V rms max 0.5 watt into 47ohm less than 0.01% SIGNAL TO NOISE RATIOS* (vs.
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1.
