Quick Start Manual

MIXER QUICK SETUP GUIDE (ENGLISH)
1. Make sure all items listed on the front of
this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET
BEFORE USING THE PRODUCT
3. Study this setup diagram.
4. Place mixer in an appropriate position for
operation.
5. Make sure all devices are turned off
and all faders are at “zero”
6. Connect all stereo input sources as
indicated in the diagram.
7. Connect the stereo outputs to the power
amplifier(s), tape decks, and/or audio
sources.
8. Plug your mixer and other devices into AC
power.
9. Switch everything on in the following
order.
• audio input sources (i.e. turntables or
CD players)
• your mixer
• last, any amplifiers
10. When turning off, always reverse this
operation by,
• turning off amplifiers
• your mixer
• last, any input devices
11. Go to http://www.numark.com for product
registration.