QUICKSTART GUIDE ENGLISH ( 3 – 6 ) GUÍA DE INICIO RÁPIDO ESPAÑOL ( 7 – 10 ) GUIDE D’UTILISATION RAPIDE FRANÇAIS ( 11 – 14 ) GUIDA RAPIDA ITALIANO ( 15 – 18 ) KURZANLEITUNG DEUTSCH ( 19 – 22 )
BOX CONTENTS NDX400 CD player Power cable Stereo RCA cable Quickstart Guide Safety & Warranty Information Booklet REGISTRATION Please go to http://www.numark.com to register your NDX400. Registering your product ensures that we can keep you up-todate with any new product developments and provide you with world-class technical support, should you run into any problems. GROUND RULES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Make sure all items listed in the BOX CONTENTS section are included in the box.
TOP PANEL FEATURES 1. EJECT – Press this button to eject the CD. If a CD is currently playing, this button will have no effect. This unit is designed to play commercially available CDs, properly burned and finalized CD-Rs, and MP3 CDs. Due to variances on the specification of certain CD burners and CDs, some homemade CDs may not play properly. We recommend burning CDs at the minimum speed possible for the best performance. USB – Connect a USB thumb drive (with a FAT16 or FAT32 file system) with MP3s here.
12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. JOG WHEEL – The jog wheel serves many functions depending on its current mode. a) If a track is not playing, the JOG WHEEL will search slowly through a track's frames. To set a new cue point, rotate the JOG WHEEL then begin playback when you have determined the proper position. Press CUE to return to that cue point. b) If a track is playing, the JOG WHEEL will temporarily bend the pitch of the track.
REAR PANEL FEATURES 1. 2. 3. 4. 5. VOLTAGE SELECTOR --- Set this switch to the voltage for your location. POWER PLUG CONNECTOR – Plug your supplied power cord in here. POWER SWITCH – Turn the machine on and off with this button. The unit should 2 3 always be shut down with this button first 4 5 before any external power is removed. 1 Typically it is recommended that the CD player is powered on before amplifiers and powered off after amplifiers.
CONTENIDO DE LA CAJA NDX400 Cable de alimentación Cables conectores RCA Guía de inicio rápido Folleto de información sobre la seguridad y la garantía REGISTRO Visite http://www.numark.com y registre su NDX400. El registro de su producto asegura que podamos mantenerle actualizado con los nuevos desarrollos de productos y brindarle apoyo técnico de categoría mundial en caso de que tenga algún problema. REGLAS BÁSICAS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
CARACTERÍSTICAS DEL PANEL SUPERIOR 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EJECT – Pulse este botón para expulsar el CD. Si se está 20 2 reproduciendo un CD, este botón no 26 tiene ningún efecto. Esta unidad está 19 diseñada para poner los CDs comercial 1 disponible, los CDs MP3 y los CD-Rs 18 correctamente escritos y cerrados. 3 Debido a las variaciones en la 15 16 17 24 especificación de ciertos escritores de 4 CD y CDs que están hechos en casa 14 14 13 14 pueden funcionar incorrectamente.
12. 13. 14. 15. 16. 17. 18. RUEDA DE AVANCE POR PASOS – Esta rueda cumple numerosas funciones que dependen del modo en que se encuentra. a) Si no se está reproduciendo una pista, la RUEDA DE AVANCE POR PASOS busca lentamente a lo largo de los frames de la pista. Para determinar un nuevo punto de cue, gire la RUEDA y comience a reproducir una vez que haya determinado la posición adecuada. Pulse CUE para volver a ese punto de cue.
CARACTERÍSTICAS DEL PANEL TRASERO 1. 2. 3. 4. 5. SELECTOR DE VOLTAJE – Ajuste este interruptor al voltaje de su ubicación. CONECTOR DEL CABLE DE ALIMENTACIÓN – enchufe su cable eléctrico previsto aquí. POWER SWITCH – enciende y apaga la 2 3 máquina con este botón. La unidad se debe 4 cerrar siempre con este botón primero antes de 5 que se quite cualquier potencia externa.
CONTENU DE LA BOÎTE NDX400 Câble d'alimentation Câble de connexion RCA Guide d'utilisation simplifié Le livret des consignes de sécurité et des informations concernant la garantie ENREGISTREMENT Veuillez visiter le site internet http://www.numark.com pour enregistrer votre nouveau NDX400. L'enregistrement des produits vous permet d'être informé sur les nouveautés concernant les produits et de vous offrir un soutien technique de niveau international, si vous en aviez besoin. RÈGLES DE BASE 1. 2.
CARACTÉRISTIQUES DU PANNEAU SUPÉRIEUR 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EJECT – Enfoncez ce bouton pour éjecter le CD. Cette touche ne 20 fonctionne pas si le CD est en mode 2 26 lecture. Cette unité est faite pour les 19 CDs disponibles, pour le CD-Rs 1 finalisé et pour le MP3-CDs. A cause 18 de la variabilité de chaque CD, ceux 3 qui sont fait à la maison ne peuvent 15 16 17 24 pas représenter correctement.
12. 13. 14. 15. 16. 17. 18. MOLETTE – La molette permet de commander plusieurs fonctions, selon le mode de lecture en cours. a) Si aucune piste n'est en cours de lecture, la molette permet de parcourir toutes les trames de la piste. Pour régler un nouveau point de repère, faites tourner la molette, puis lancez la lecture lorsque vous avez trouvé le bon point. Appuyez sur la touche CUE pour retourner à ce point de repérage.
CARACTÉRISTIQUES DU PANNEAU ARRIÈRE 1. 2. 3. 4. 5. SÉLECTEUR DE TENSION – Régler la tension adéquatement pour votre région. CONNECTEUR POUR CÂBLE D'ALIMENTATION – Branchez votre corde d’alimentation ici. INTERRUPTEUR D'ALIMENTATION – C’est le 2 3 button qui permet d’allumer ou d’éteindre la 4 machine. L’unité doit être éteinte premièrement 5 par ce bouton avant de débrancher la machine.
CONTENUTI DELLA CONFEZIONE NDX400 Cavo di alimentazione Cavo di connessione RCA Guida rapida Libretto di istruzioni di sicurezza e garanzia REGISTRAZIONE Recarsi alla pagina http://www.numark.com per registrare il NDX400. La registrazione del prodotto garantisce che possiamo tenervi aggiornati con tutti gli ultimissimi sviluppi del prodotto e offrirvi assistenza tecnica di livello mondiale, in caso di eventuali problemi. NORME FONDAMENTALI 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
CARATTERISTICHE PANNELLO SUPERIORE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. EJECT – Premere questo tasto per espellere il CD. Se un CD è in riproduzione, questo tasto non avrà 20 2 26 effetto. Questa unità è progettata per 19 utilizzare dei CD disponibili sul 1 mercato, dei CD MP3 e dei CDR iscritti 18 e finalizzati correttamente.
12. 13. 14. 15. 16. 17. 18. ROTELLA JOG WHEEL – La rotella jog wheel ha numerose funzioni, a seconda della modalità in cui ci si trova. a) Se la traccia non è in corso di riproduzione, la rotella cercherà lentamente tra i frame della traccia stessa. Per impostare un nuovo punto cue di un frame, far ruotare la rotella, quindi avviare la riproduzione quando è stata determinata la posizione desiderata. Premere CUE per tornare a quel punto cue.
CARATTERISTICHE PANNELLO POSTERIORE 1. 2. 3. 4. 5. SELETTORE VOLTAGGIO – Impostare questo interruttore sul voltaggio locale. PRESA CONNETTORE D'ALIMENTAZIONE – Inserire a questo livello il cavo di alimentazione in dotazione. INTERRUTTORE DI ALIMENTAZIONE – 2 3 Questo è il pulsante che permette di accendere 4 5 e di spegnere l’apparecchio. L’unità deve 1 essere spenta sempre con questo pulsante prima che qualsiasi cavo di alimentazione sia tolto.
INHALT DER VERPACKUNG NDX400 Stromkabel RCA-Verbindungskabel Kurzanleitung Broschüre mit den Sicherheits- und Garantierichtlinien REGISTRIERUNG Registrieren Sie Ihren NDX400 bitte auf http://www.numark.de. Dadurch geben Sie uns die Möglichkeit, Ihnen Informationen bei Produktaktualisierungen zukommen zu lassen und um Ihnen die bestmögliche technischen Support zu bieten. GRUNDREGELN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Vorderseite der Anleitung abgebildeten Bestandteile im Karton befinden.
ÜBERSICHT ÜBER DIE OBERSEITE 1. 2. 3. 4. EJECT – Mit diesem Taster werfen Sie eine CD aus. Wird diese gerade abgespielt, hat dieser Taster keine Auswirkungen. Dieses Gerät für handelsübliche CDs, MP3-CDs und entsprechend gebrannte und finalisierte CDRs entworfen. Wegen den Variationen der Spezifikationen verschiedener CD-Brenner und CDs, sowie von privat gebrannten CDs ist die Wiedergabe möglicherweise fehlerhaft.
13. 14. 15. 16. 17. 18. REC – Drücken Sie diesen Button und anschließend einen der HOT CUE-Buttons, um einen Hot-Cue-Punkt an der aktuellen Stelle des Tracks aufzunehmen. HOT CUE – Drücken Sie REC und anschließend einen dieser Buttons, um einen Hot-Cue-Punkt an der aktuellen Stelle des Tracks aufzunehmen. Eine LED-Anzeige über dem Button wird aufleuchten, um anzuzeigen, dass ein Hot-CuePunkt gesetzt wurde. Sie können diese Hot-Cue-Punkte auch auf dieselbe Art und Weise überschreiben.
ÜBERSICHT ÜBER DIE RÜCKSEITE 1. 2. 3. 4. 5. SPANNUNGSUMSCHALETER – Stellen Sie diesen Schalter auf die für Ihren Aufenthaltsort richtige Stromspannung ein. ANSCHLUSS FÜR GENORMTEN NETZSTECKER – stecken Sie das mitgelieferte Anschlusskabel hier ein. 2 3 4 EIN-/AUS-SCHALTER – Schalten Sie das Gerät 5 mit dieser Taste ein oder aus. Das Gerät muss 1 immer mit dieser Taste abgeschaltet werden, bevor Anschlusskabel abgezogen werden.
SPECIFICATIONS DISC TYPE: Redbook CD, CD-R, CD-RW, MP3 CD TIME DISPLAY: Track Elapsed, Track Remaining, Total Remaining FREQ RESPONSE: ± 2 dB (20 Hz – 20 kHz) THD: < 0.03% SNR: 80 dB (A-weighted) OUTPUT LEVEL: 1.9 V (±0.2) CHANNEL SEPARATION: > 80 dB CHANNEL DIFFERENCE: < 1 dB PITCH CONTROL RANGE: ± 4, 8, 16 or 100% DIMENSIONS (W x D x H): 292 mm x 216 mm x 106 mm WEIGHT: 3.
www.numark.