Operation Manual

233970 (Page 20) 10/11 (A13)

Quick Set-Up Guide

PLEASE READ BEFORE COMMENCING ANY OPERATION.

After the removal of all the packaging, carefully open and check the contents.

Ensure the Batteries are charged before use.

Using the handle position lever, move the handle into the

upright position. (Fig 1).

Fit the Brush / Pad (Fig 2).

Swing the oor-tool carrier from behind the brush. (Fig 3).

Fit the battery to the machine (Fig 5) and plug in the power

supply. (Fig 5a). Ensure the battery has been charged before

use.

Using the two locking knobs tted to the oor-tool, secure to

the oor-tool to the oor-tool carrier. (Fig 4).

Fill the clean-water to a Max of 18 litres

(see page 24)

For operation and cleaning

controls (see page 30)

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5

Fig 5a