Operation Manual

14
Set automatic Chemical Dosing Mix as required, depending on oor type and level of soiling.
Set desired traction Speed as required, depending on
oor type and level of soiling.
Middle speed is the optimum cleaning speed.
Once the Max speed has been set using the knob on the
control panel, ne adjustments can be made using the
variable control speed trigger.
Set Water Flow Rate as required, depending on oor type and level of soiling.
Insert the key into the master control on/off and quarter-turn it clockwise to the ‘On’ position.
The battery charge-level indicator will illuminate for 5 seconds.
0.13 G/ Min
0.264 G/ Min
0.528 G/ Min
0.793 G/ Min
100 : 1
75 : 1
50 : 1
25 : 1
Setting the Cleaning Controls
The TTV-5565 has been tted with a Hi - Lo mode, this reduces the noise produced by
the vacuum motor by 3dB.
To operate the Hi - Lo mode start the machine in the normal way.
When the machine is running normally the Hi - Lo light will NOT be
illuminated This means the Vacuum motor is running at 100%.
With the machine running press the Hi - Lo button once the Vacuum motor will reduce
speed to 75% of capacity and the Hi - Lo light will illuminate Blue.