Use and Care Manual

ManualsBrandsNuMax ManualsAir Compressors, Tools & AccessoriesPneumatic 3-1/2 in. 28-Degree Framing Nailer

MODEL: SFR2890 MODEL: SFR2890

HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672

The following signal words and meanings are intended to explain the levels of risk

associated with this tool, and can be found in the manual, packaging, labeling, and

all other information provided with this tool:

SYMBOLS SIGNAL MEANING

WARNING:

CAUTION:

Indicates a potentially hazardous situation,which, if

not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation, which, if

not avoided, may result in minor or moderate injury.

(Without symbol) Indicates a situation that may result

in property damage.

●

HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672

SYMBOLS

●

WORK AREA

Keep the work area clean and well

lit. Cluttered benches and dark areas

increase the risks of accidents.

Do not operate the tool in explosive

a t m o s p h e r e s , s u c h a s i n t h e

pr ese nc e o f f la mm ab le l iq uid s,

gases, or dust. The tool creates a

spark which may ignite flammable

liquids, gases or dust.

Ke ep by sta nde rs, c hil dren , a nd

others away while operating the

to ol. Di st ractio ns coul d resul t in

improper use and cause injury.

A v o i d u n i n t e n t i o n a l m i s f i r e s .

A l w a y s u s e c a u t i o n t o a v o i d

accidentally firing. Do not point at

yourself or anyone else regardless if

it contains fasteners or not.

Do not nail on top of another nail. This nail

can cause the nail to be deflected and hit

someone, or cause the tool to react and

result in a risk of injury to persons.

Remove finger from the trigger when not

driving fasteners. Never carry the tool with

finger on trigger, the tool is able to fire a

fastener.

Always wear eye protection. Operator and

others in the work area should always wear

ANSI-approved safety goggles with side

shields. Eye protection is used to guard

against flying fasteners and debris, which

may cause severe eye injury.

Always wear hearing protection when

using the tool. Prolonged exposure to high

intensity noise may cause hearing loss.

Use safety equipment. A dust mask, non-

skid safety shoes and a hard hat must be

used for the applicable conditions. Wear a

full face shield if you are producing metal

filings or wood chips.

Dress properly. Do not wear loose clothing

or jewelry. Contain long hair. Keep your long

hair, clothing, and gloves away from moving

parts. Loose clothes, jewelry, or long hair

can be caught in moving parts.

Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use tool while tired or

under the influence of drugs, alcohol, or

medication. A moment of inattention while

operating the tool may cause serious injury.

Avoid unintentional firing. Keep fingers

away from trigger when not driving

fasteners, especially when connecting the

tool to the air supply.

Keep proper footing and balance at all

times. Proper footing and balance enables

better control of the tool in unexpected

situations.

PERSONAL SAFETY

CALIFORNIA PROPOSITION 65

his product can expose you to

chemicals including lead, which is

known to the State of California to

cause cancer and birth defects or

other reproductive harm. For more

information, go to

www.P65Warnings.ca.gov.

GENERAL SAFETY RULES

SIN STRUC TION S PE RTA IN ING TO A

RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS.

When using tools, basic precautions

should always be followed, including

the following:

WARNING:

GENERAL SAFETY RULES

UNPACKING

FEATURES

OPERATION

MAINTENANCE

RECOMMENDED HOOKUP

TROUBLESHOOTING

WEARABLE PARTS

WARRANTIES

ADJUSTING THE EXHAUST

LOADING FASTENERS

UNLOADING FASTENERS

CLEARING JAMS

NON-MARRING PAD

SETTING THE AIR PRESSURE

DEPTH ADJUSTMENT

FIRING THE TOOL

K ee p th is m an ua l f or t he s af et y

war ning , prec autio ns, oper ation s,

i n s p e c t i o n s a n d m a i n t e n a n c e

information. Keep this manual and

the receipt in a safe and dry place for

future reference.

●

WARNING:

The warnings and precautions discussed in this manual cannot cover all possible conditions

and situations that may occur. Please be aware of the potential hazards, and take all

necessary precautions to avoid risk of injuries.

To avoid serious personal injury,

d o n o t a t t e m p t t o u s e t h i s

product until you read the manual

th oro ug hl y a nd un de rs tan d i t

completely. Save this manual and

review frequently for continuing

safe operation and instructing

others who may use this tool.

WARNING:

SAVE THIS MANUAL

ANTI-DRY-FIRING MECHANISM

P10

P11

P12

P13