L31 IMN200800AV-E 03/16
! ! ! ! ! 02 HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672 HTTP://WWW.NUMAXTOOLS.
04 HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672 HTTP://WWW.NUMAXTOOLS.
! 0.079”(2mm) 3/8” 10mm 3/4” 20mm 5/8” 15mm 1” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4” ! ! 2” 25mm 32mm 35mm 38mm 40mm 45mm 50mm 1.26 x 1.05mm (0.050” x 0.041”) 18Ga. 0.118”(3mm) 1/4”(5.7mm) 3/4” 1” 19mm 25mm 1-1/4” 32mm 1-3/8” 35mm 1-1/2” 38mm 1-5/8” 40mm 1-3/4” 45mm 2” 50mm 1.6 x 1.4mm (0.063” x 0.055”) 16Ga. 13mm 5/8” 16mm 3/4” 19mm 1” 25mm 1-1/4” 32mm 1-1/2” I 38mm 1-5/8” 40mm 1.26 x 1.05mm (0.050” x 0.041”) 18Ga. ° Allows user to direct air away from face.
! ! ! ! Disconnect the air supply from the tool. Remove all fasteners from the magazine. Make sure the trigger and work contact element move freely up and down without sticking or binding. Reconnect air supply to the tool. Depress the work contact element against the work surface without pulling the trigger. The tool must not operate. Do not use the tool if it operates without pulling the trigger. Personal injury may result. Remove the tool from the work surface.
- ! check it after unpacking. ! ! ! 10 HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672 HTTP://WWW.NUMAXTOOLS.
12 HTTP://WWW.NUMAXTOOLS.COM 1-888-669-5672 HTTP://WWW.NUMAXTOOLS.
