/\ WARNING: The wakings and precautions discussed In the manual cannot cover all possible conditions and situations that may occur. it must be understood by the user that common sense and caution are factors which cannot be bulk Into this product, but must be supplied by the user. SAVE THIS MANUAL @® Keep this manual for the safety wakings, precautions, operations, Inspections and maintenance. Keep this manual and the receipt In a safe and dry place for future reference.
@ Separate and Adjustable fluid, fan pattern and air controls for precise application. @ With ergonomic body design that helps to reduce painter fatigue. ® 400cc aluminum cup @ Stainless steel made spray needs and nozzle enhance durability and longevity. ® Cleaning kit, regulator, alr connector and extra filter are Included. OPERATION OPERATING THE SPRAY GUN ® Before operating the gun, make sure all nuts and bolts are tight.
SUMNER MODEL: SPSC15 PROBLEMS POSSIBLE CAUSES) ‘CORRECTIVE ACTION Qun does not spray | 1. Alr hiss connections at 1. Tighten and seal hiss compressor are colas. 2. Paint cup Is loo: , clogged or damaged. 4. Alr pressure too low. 5. Material is too thick or sends fittings with Teflon tape If leaks are found. 2. Ts aunt cup to gun. 3. Clean parts with solvent. 4. Adjust regulated air pressure to 50-65 PSI. 5. Thin material according to manufacturer's Instruct] aln mi | using a paint strainer. 6.
