User's Manual

removed or repositioned by the wearer without destroying the strap or pins. The device must remain
located at the outer side of the leg.
3.4 Finalizing Set-up in the FocalPoint® Offender Monitoring™ Application
Once the device is installed, users must log into FocalPoint to clear the device tamper alerts and confirm
that the device is being tracked successfully.
Step 1: Log into FocalPoint
Step 2: On the home page, search for any “Device Tamper” icons for the device.
Step 3: Click the “Device Tamper” icon so that the tamper details window opens.
Step 4: Click the “Clear Alert” button on the alert details screen.
Step 5: Before releasing the offender, wait until two location points are received to verify that
FocalPoint is successfully tracking the device and that no device tamper alert has returned to the screen.
If a tamper alert does appear, exchange pins.
4 Removing a Device
Step 1: Direct the individual to place the heel of their shoe on the edge of the table.
Step 2: Using a flat-head screwdriver, turn the bottom pin until its head snaps off and the top pin pops
out of the device.
Step 3: Push a paperclip or other thin instrument into the top pin hole in order to expel the broken body
of the bottom pin from the device.
Step 4: Remove the device from the leg by reversing the installation process.
5 Storing the Device
The device should be stored with the strap and back plate positioned as if the device is on an offender.
The strap needs to remain in a circular position so it stays soft and pliable. Store the device with only the
top pin inserted. When possible, the device should be plugged into an electrical outlet to ensure that it
has been charged for at least 3 hours prior to use.
6 Using the OM400 RF Beacon™
If you purchase an OM400 RF Beacon to be used with your OM400™ there are a few simple steps to set
up the Beacon for use.
Step 1: When creating an offender and a home zone, check the box market “Assign a Beacon to this
device and Home Zone”
Step 2: In the select/assign beacon screen please select the beacon device number you wish to assign to
this offender and select “Assign”
Alternate Set-Up
If you wish to assign a beacon outside of the initial offender set-up process, take the following steps.
Step 1: Click the “Manage Devices” button under the Administration tab on the top right of the
application