User Manual nuraphone #I00B
Contents 1. Safety Information 3 2. nuraphone User Guide 5 Getting Started 6 Fitting your nuraphone 8 Powering on/off Connecting your nuraphone with Bluetooth® 7 9 How to calibrate your nuraphone 10 Charging your nuraphone 13 Connecting your nuraphone 15 Settings Voice calls Care and Maintenance Troubleshooting 11 14 16 17 3. Support 17 4. Warranty 17 5.
Safety Information Please thoroughly read all safety instructions. Your nuraphone has been designed and tested with the strictest of consideration for safety and comfort, but please note: exposure to any loud noise at or above 85 decibels (dB – approximately the same volume of a food blender) can cause gradual hearing loss. Due to the clarity and sound isolation of the nuraphone you will not need to play your music as loudly as with conventional headphone products.
Be aware that sounds that you may rely on as reminders or warnings i.e. alarms, message tones and incoming calls may vary whilst using your nuraphone. If you experience a warming sensation or loss of hearing remove nuraphones immediately. If your nuraphone emits a loud or unusual noise, do not use and contact NURA® Customer Experience Experts immediately.
nuraphone User Guide Soft touch silicon Flexible band, comfortable for everyone Touch control inova™ architecture Patented cooling technology Universal NURA® connector Durable metal body The nuraphone is designed with complete comfort in mind for all-day listening. Made from a soft touch silicon material, the nuraphone ensures there is no slipping on your skin, or pulling on your hair during wear.
Getting Started Welcome to Personalised Sound nuraphones use a world-first, patented technology and innovative Inova™ architecture to learn and adapt to the unique way that you hear. Using a built in sensor and signal processing, they are able to automatically measure your hearing profile in 60 seconds. No tricky tests or settings. No user responses. It’s a bit like magic. Read more about this at www.nuraphone.
Powering on/off How do I turn my nuraphone on? Your nuraphone will automatically turn on when placed on your head. Within a few seconds of placing the device correctly on your head, you will hear a Welcome message. If you have not heard this message, try adjusting the placement and gently pushing the cups against your head. Your nuraphone will also turn on as soon as a cable has been plugged into the headset—so don’t forget to disconnect all cables from the headset when it is not in use.
Fitting your nuraphone To make sure you get the left and right side correct, simply hold the nuraphones in your hands and look at them from below. The cable port should on the bottom of the ear cup on your right hand side and the word nuraphone on the underside of the headband should be visible and properly oriented. Orientation Get comfortable in your nuraphone by sliding the adjusters on the sides of the headband to match your head size.
Connecting your nuraphone with Bluetooth® 1. Place your nuraphone on your head in a comfortable position to turn it on. 2. The first time you connect your nuraphone it will welcome you and tell you a three digit pairing number. Remember this number as it identifies your headset from other nuraphones that may be in proximity. 3. On your mobile device, turn on the Bluetooth feature. Note: The Bluetooth feature is usually found in the Settings menu 4.
How to calibrate your nuraphone To create your personalised sound and unique hearing profile, you must calibrate your nuraphone. We recommend being in a quiet, private place to ensure an accurate calibration. Stay as still and as quiet as possible by sitting down. Avoid movement that may disturb your nuraphone such as touching your ears or moving your jaw. Note: Make sure your nuraphone and mobile device are charged and that you have downloaded the NURA® app via Apple App Store or Google Play.
Settings Generic + Personalised After the calibration you can compare your nuraphone by changing between generic and personalised sound. You can toggle between generic and personalised mode using the slider below the image of your personal hearing profile. Generic mode Personalised mode Volume Adjust the volume to a comfortable level using your mobile device’s usual volume buttons and any that may be in the player you are using. Immersion Mode You don’t just hear music, you also feel music.
Touch Buttons Your nuraphones have two touch buttons positioned on the adjuster covers on right and left. You can configure them to perform a variety of functions. Note: As many of the functions require a Bluetooth connection to work correctly, the touch buttons are only functional in bluetooth mode. They do not function when a cable is plugged in.
Charging your nuraphone You can charge your nuraphones by simply plugging them into a wall charger or computer using the included USB-A or a USB-C cable. To prevent the nuraphone from draining the battery of your mobile device the micro-USB and Lightning cables do not power or charge your nuraphones Your nuraphone is powered from battery in Bluetooth mode and in wired modes using analog, USB-C (when plugged into a phone), micro-USB and Lightning cables.
Voice calls Your nuraphone can function with your mobile device to make and receive calls when connected through Bluetooth or Lightning cable.
Connecting How do nuraphones connect? nuraphones feature universal connectivity. This means that every pair can connect to source devices supporting the following options: ✓ Wireless - Bluetooth enabled devices ✓ Analog - standard 3.
Care and Maintenance Your nuraphones may require periodic cleaning. To clean them, follow the guidelines below. Remove the tips from the earbuds and gently wash them with a mild detergent and water. Make sure you thoroughly rinse and dry the tips before re-attaching them. Clean only with a soft, damp cloth. Do not use cleaning solvents, alcohol or strong detergents. Before storing your nuraphones for more than a few months, fully charge the battery. Place the headphones in the carry case for storage.
Troubleshooting Bluetooth problems If you have problems pairing with your phone: • Make sure no other device is paired to your nuraphone Note: nuraphones automatically try to pair with any device they have previously connected to • Make sure your mobile device’s Bluetooth is switched on in your Settings menu • Turn your phone’s Bluetooth on and off and re-connect to your nuraphone • Try forgetting or deleting your nuraphone from your mobile device’s paired device list If you have problems with t
Compliance NURA® adheres to the certification requirements for various regions around the world. For a full list of certifications please visit: www.nuraphone.com/compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NURA®, Level 1 Studio 3, 459 Sydney Rd, Brunswick VIC, Australia, declare under their sole responsibility that the product described in this user guide complies with technical standards EN300328, EN301489, EN55022, EN55024, EN50332. The product is only guaranteed to comply with EN50332 in generic mode with immersion off with the volume limiter on. Depending on the hearing of the user, some combinations of hearing corrections and immersion setting may exceed EN50332 limits.
The nuraphone is designed by NURA® in Melbourne, Australia. Made and assembled in China. © 2017 NURA®. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
