User's Manual

Turning Your nuratrue pro on/oﬀ

Your nuratrue pro turns on and oﬀ automatically when you put it in your ears.

To Power On: Remove your nuratrue pro from the charging case.

To Power Oﬀ: Place your nuratrue pro into the charging case.

Power reserve: By default, your nuratrue pro will pause playback when removed from your

ears and resume when placed back on. Your nuratrue pro will automatically power oﬀ after

60 seconds if one or both earbuds have been removed from your ears. You can customise

the power reserve functionality within the nura app.

Downloading the nura App

To set up your nuratrue pro, you will need to personalise it via the nura app.

You can download the nura app from:

● iOS — the App Store

● Android — Google Play

nura app system requirements:

● iOS — iOS 9.3+ and Bluetooth® 4

● Android — Android 5.0+ and Bluetooth® 4

Connecting Your nuratrue pro With Bluetooth®

You will need to connect your nuratrue pro to your mobile device via Bluetooth to

access the nura app and personalise your nuratrue pro.

To connect your nuratrue pro with Bluetooth:

1. To enter pairing mode, tap and hold down both touch buttons on each side.

2. On your mobile device go to Settings > Bluetooth

3. Select nuratrue pro XXX. XXX is the nuratrue pro unique pairing number.

Swapping Between Bluetooth® Devices

Your nuratrue pro automatically enters discoverable mode for two minutes when you

enter pairing mode. To enter pairing mode, tap and hold down both touch buttons on

each side.

When your nuratrue pro is in discoverable mode, select nuratrue pro XXX in the Bluetooth

settings of any device you would like to switch to.

A voice prompt will announce "Bluetooth device changed."

You have now swapped your connection.