User's Manual

transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to
your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new
transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have only three transmitters
matched to it.
To match transmitters to your vehicle:
1. Turn the ignition key to
ON
.
2. Clear any warning messages on the Driver Information Center (DIC) by pressing the RESET button.
3. Press the OPTIONS button on the DIC several times until the blank page is displayed, the press and
hold the
RESET
button for two seonds.
4. When the message FOB TRAINING is displayed, push the RESET button once. The message HOLD
LK+UNLK 1
ST
FOB
in DIC will be displayed.
5. Press and holf the LOCK and UNLOCK buttons on the transmitter simultaneously for 15 seconds.
6. When the transmitter is learned (matched), the DIC will display
FOB LEARNED
and then prompt you to
learn the next transmitter.
7. Repeat steps 5 and 6 for each additional transmitter.
8. Remove the key from the ignition.
The programming mode will shut off if:
• You don’t program any transmitter for two minutes.
•
You take the key out of the ignition.
• You have programmed three transmitters.