User Manual
Standard Programming: Use this method to program additional or replacement
transmitters. Before you begin, have all transmitters at hand.
Step 1 Then, turn the ignition “on” (do not crank the engine).
Step 2 Within 5 seconds of Step 1, press the Valet Switch 5 times. The siren/horn
will briey sound & the status light will turn on, conrming that the system is ready to
learn a transmitter code.
Step 3 Press the “start” button on each transmitter one at a time. The system will
chirp the siren/horn once & the status light will turn off briey to conrm that each was
learned. If a code is not received within 10 seconds of Step 2, the learning process
will automatically exit.
Step 4 Then, turn the ignition “off” or wait 10 seconds to exit programming.
Programming Transmitters
The system is equipped with two separate Anti-Carjacking protection features
(ignition, open door, or both) that are selectable via user feature #12. Once activated,
the user has 60 seconds to cancel the Anti-Carjacking protection process (described
below). If Anti-Carjacking is not cancelled, 53 seconds after being activated the siren
will begin to chirp for 7 seconds to alert the user that the system is about to enter into
an alarm condition. The Valet Switch may still be pressed once during this period to
cancel the Anti-Carjacking process.
If the Anti-Carjacking process is not cancelled before the 60 second countdown
expires, the system will enter an alarm condition, sounding the siren and ashing the
parking lights. 30 seconds after this occurs, or should the ignition be turned off in the
meantime, the stater interrupt will engage. Once the system enters the alarm condi-
tion, it will not respond to the transmitter, nor will the system reset automatically after
60 seconds, and it can only be disengaged by:
Step 1 Turning the vehicle’s ignition off.
Step 2 Turning the ignition back on.
Step 3 Within 5 seconds, perform an Emergency Override using the Valet Switch.
TYPES OF ANTI-CARJACKING PROTECTION
Ignition Activated Anti-Carjacking activates every time the vehicle’s ignition is
turned on. The Valet Switch must be pressed within 60 seconds of activating to can-
cel Anti-Carjacking.
Door Anti-Carjacking (optional)activates when a door is opened after the vehicle
is started and the engine is running. The Valet Switch must be pressed within 60
seconds after activation to cancel Anti-Carjacking.
Anti-Carjacking Protection
1 FLASH: Run time expired.
2 FLASHES: Brake pedal was pressed.
3 FLASHES: Engine stalled or a bad tach signal.
4 FLASHES: Received transmitter command to stop.
5 FLASHES: The neutral safety circuit was triggered.
6 FLASHES: The alarm was triggered or low battery voltage.
7 FLASHES: The hood was opened.
The Status Light (cont’d)
7