User Manual

7
Panic Alarm
1. Press and hold the button for 3 seconds to activate panic
alarm. Once activated, the panic alarm will sound the horn or
siren and flash the parking lights for 30 seconds.
2. Press and release the or button to stop the
panic mode.
Note: You can also press and hold the button for
3 seconds to stop the panic alarm.
Trunk Release (CH#3)
Press and hold the button for 3 seconds to
release the trunk/ hatch lid
- The vehicle must have electronic trunk control
- The trunk release control option must be installed
AUX Output Activation (CH#4)
Depending on your installation, your installer may have connected
the channel #4 output to your vehicle. To activate the AUX/CH#4
output, press and hold the + buttons together for 2 seconds.
This action will energize the White/Blue wire for as long as you hold
the buttons down. The operation of AUX Channel #4 is programmable.