User's Manual

Normal Operation:
.
.
When the probe touches water, the sensor will sound an alarm
and send a signal to a receiving device. If the signal is sent to a VCU
unit, it will close the valve. Sensor will continue alert until the probe
is dry. Sensor can be reset or alarm silenced by pressing the Red
Button.
For FCC Compliance
NOTE: To comply with the FCC RF exposure
compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF
exposure requirements and void user’s authority to
operate the device.
Furthermore:
The changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
Page 3
XT.MExbufstfotpsnbovbm/qeg!!!4XT.MExbufstfotpsnbovbm/qeg!!!4 312105026!!!Πϱ!14;42;55312105026!!!Πϱ!14;42;55