AL-1510-EDP Deluxe 2-way Alarm & Keyless Entry December 5, 2016 Operation Guide Temporary cover. Color cover is in a separate file.
Table Of Contents Controller & Transmitter Overview ������������������������������������������������������������������������������� 3 The 2-Way Controller ����������������������������������������������������������������������������������������������� 3 The 1-Way Transmitter ��������������������������������������������������������������������������������������������� 3 Controller & Transmitter Functions ������������������������������������������������������������������������������� 3 Using The Valet Switch �
Controller & Transmitter Overview THE 2-WAY CONTROLLER 1 03G Controller part number: 152 152-03 1) Antenna: Sends commands to the system and receives confirmations for 2-way functions. 2 5 2) LCD Display: Displays all controller functions as well as the status of your system. 6 3) Lock Button 7 4) Unlock Button 5) Trunk Button 6) 3rd Channel / Start Button 7) Programming Button: This is used for setting controller features.
Controller & Transmitter Functions (cont’d) UNLOCK / DISARM: Press and release the “UNLOCK” button. • THE SIREN WILL CHIRP TWICE & THE PARKING LIGHTS WILL FLASH TWICE THEN ILLUMINATE FOR 30 SECONDS. • UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL SHOW THE UNLOCK/ DISARM ICON AND BEEP TWICE. (1-WAY TRANSMITTER: PRESS THE UNLOCK BUTTON) TRUNK RELEASE / CHANNEL 2: Press the “ seconds. ” button for 3 • THE SYSTEM WILL DISARM AND THE TRUNK WILL OPEN (IF EQUIPPED).
Controller & Transmitter Functions (cont’d) CHANNEL 4 (IF EQUIPPED): Press and hold the “LOCK” & “ buttons for 3 seconds. ” • YOUR SYSTEM WILL ACTIVATE THE CHANNEL 4 OUTPUT. • THERE IS NO 2-WAY CONFIRMATION FOR THIS FUNCTION. (1-WAY TRANSMITTER: PRESS AND HOLD THE LOCK & “||” BUTTONS FOR 3 SECONDS) CHANNEL 5 (IF EQUIPPED): Press and hold the “UNLOCK” & “ “ buttons for 3 seconds • YOUR SYSTEM WILL ACTIVATE THE CHANNEL 5 OUTPUT. • THERE IS NO 2-WAY CONFIRMATION FOR THIS FUNCTION.
Controller & Transmitter Functions (cont’d) SILENT ARM / DISARM: Press and release the “ 5 seconds. ” button twice in • THE PARKING LIGHTS WILL FLASH, AND THE DOORS WILL LOCK/ARM OR UNLOCK/DISARM DEPENDING ON THE CURRENT SYSTEM STATUS. • UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, THE CONTROLLER WILL SHOW THE LOCK/ ARM OR UNLOCK/DISARM ICON. (1-WAY TRANSMITTER: PRESS RELEASE THE “||” BUTTON TWICE IN 5 SECONDS) x2 SENSOR BYPASS: Press and release the “ onds of locking/arming the alarm system.
Using The Valet Switch EMERGENCY OVERRIDE If you were to lose or break your controller, you’d need to perform an emergency override to disarm the system and use your vehicle. To do so, use the following steps: STEP 1 - Enter the vehicle (the alarm should sound) STEP 2 - Turn the ignition key to the “ON” position STEP 3 - Press the valet switch (located in the window-mount antenna) once NOTE: Enter your SecureCode at this time if programmed via user feature #1 STEP 4 - Turn the ignition “OFF”.
Security System Features LAST DOOR ARMING This system can be configured to arm automatically when all the vehicle’s doors are closed (see user feature #2). When this feature is utilized, the siren/horn will chirp once when all of the doors are closed. At that point, it will start a 30 second countdown (indicated by a fast flashing status light). After 30 seconds, the system will arm (and lock the doors if configured to do so).
The Status Light The status lights, located in the window-mount antenna, provide a visual indication of the system’s status via RED (alarm status) lights. SECURITY SYSTEM STATUS (RED LIGHT): OFF: The alarm is disarmed and not performing any automatic functions. ON CONSTANT: The alarm is in valet mode. FLASHING SLOW: The alarm is armed and monitoring all entry points. FLASHING FAST: One of the automatic arming features is in progress.
Multi-Car Operation The controller can operate up to 2 different systems. When controlling 2 systems, it will receive all status updates on the currently selected vehicle profile and will receive only trigger alerts for the 2nd vehicle. You can switch from one car to the other at anytime as well as choose a unique image for each vehicle. Use the following steps to change vehicles. See below for info on changing the vehicle image.
Controller Options (cont’d) SETTING THE CLOCK 1) Press the “P” button for 5 seconds to access the controller features. The controller will beep twice. 2) Press and release the “P“ button once to select the clock (hour digits will flash). 3) Press the “ “ button to scroll up or the “ “ button to scroll down. 4) Press the “P” button to switch to the minute digits. 5) Press the “ “ button to scroll up or the “ “ button to scroll down. 6) Wait 12 seconds to exit programming. The controller will beep once.
Anti-Carjacking Protection The system hass three separate Anti-Carjacking protection features (ignition, open door, or by the transmitter). All three are programmable, and must be turned on to operate. Once activated, the user has 53 seconds to cancel the Anti-Carjacking protection process by pressing the Valet Switch once.
Programming Controllers/Transmitters Standard Programming: Using this method to program additional or replacement transmitters does not turn on or otherwise affect the Unauthorized Transmitter Alert (UTA) feature. Before you begin, have all transmitters which are to operate the system at hand and make sure the correct vehicle profile (see page 12) is selected on the controller(s). Step 1 Then, turn the ignition “on”. Step 2 Within 5 seconds of Step 1, press the Valet Switch 5 times.
User Programmable Features Feature #1 - SecureCode DEFAULT - 1 Press SecureCode is a unique patented feature which allows you to custom select the number of Valet Switch presses in two stages, instead of a single “1 press”, which would be required in order to perform an Emergency Override. If any of the three anti-carjacking features are utilized, a customized SecureCode would also be required to turn it off once it is fully activated. The SecureCode operation is described on page 10.
User Programmable Features (cont’d) Feature #5 - Ignition Activated Override Off (press “disarm/unlock” button to program) - DEFAULT On (press “arm/lock” button to program) This feature allows an activated system to be overridden and disarmed by simply turning the ignition switch on within 10 seconds of the system’s activation. After 10 seconds, the Emergency Override must be performed.
User Programmable Features (cont’d) Feature #11 - Alarm Duration 30 Seconds (press “arm/lock” button to program) - DEFAULT 60 Seconds (press “disarm/unlock” button to program) 90 Seconds (press “trunk” button to program) 120 Seconds (press “start” button to program) This feature allows four choices of the Alarm Duration, which is the period of time for which the system sounding the siren (and/or horn, optionally) and flashes the parking lights when it is triggered.
User Programmable Features (cont’d) Feature #17 - Ignition Activated Anti-Carjacking Protection Off (press “disarm/unlock” button to program) - DEFAULT On (press “arm/lock” button to program) This form of Anti-Carjacking is initiated by the ignition key being turned on. The AntiCarjacking protection, and the three ways to initiate it are described on page 14.
Installer Programmable Features This group of Installer Programmable Features have a direct affect upon the system’s operations related to the installation and vehicle type AND SHOULD ONLY BE CHANGED BY THE INSTALLER!!! Feature #22 - Doorlocking Functions 0.
Programmable Features Matrix User Feature Programming: Ignition on, off, press valet 5 times, press valet # of times equal to the feature # # Feature Lock Button 1 Secure Code 1, 0 (default) Unlock button Trunk button 2 Last Door Arming 3 Automatic Rearming Off On w/o lock On w/ Lock Off On w/o lock On w/ Lock 4 Starter Interrupt Functions Alarm Off Automatic 5 Ignition Override On Off 6 Lock w/ Ignition On On Off 7 Unlock w/ Ignition Off Off Unlock #1 8 Open Door Bypass For Ign.
Back Cover Color cover is in a separate file.