User's Manual

10
The controller can operate up to 2 different systems. When controlling 2 systems, it
will receive all status updates on the currently selected vehicle prole and will receive
only trigger alerts for the 2nd vehicle. You can switch from one car to the other at
anytime as well as choose a unique image for each vehicle. Use the following steps to
change vehicles. See below for info on changing the vehicle image.
SELECTING CAR #1 OR CAR #2
Vehicle #1: Press the “P” and “LOCK” buttons for 1 second to select Car #1. The
controller will beep/vibrate once.
Vehicle #2: Press the “P” and “UNLOCK” buttons for 1 second to select Car #2. The
controller will beep/vibrate twice.
Multi-Car Operation
Controller Options
Be sure to select CAR#1 or CAR#2 before beginning as you can have a different
image for each prole. See above for more info.
1) Press the “P” button for 5 seconds to access the controller features. The controller
will beep twice and the back portion of the vehicle image will ash.
2) Press the “ “ button to or the “ “ button to scroll to the desired image.
3) Wait 12 seconds to exit programming. The controller will beep once.
CHANGING THE VEHICLE IMAGE
LCD SCREEN ICONS
CAR
Low Battery
Mute/Vibrate
Valet Mode
Channel 3
Channel 2 /
Trunk Release
Hood/Trunk
Trigger
Carjack Mode
Alarm Status
(optional)
Remote Start
Shutdown
Car 1 or 2
Clock
Remote
Start On
Door Trigger
In Range
(received 2-way
command)
Door Lock
Status
Sensor
Trigger